EN
Home
>Products
/ RFFE
/ RF switches
/ Sub-7GHz RF switches

AW12022HQNR

Broadband frequency range: 0.1 to 6.0GHz Wide VDD range: 1.65V to 3.3V GPIO interface for 0.75V to VDD positive control voltage Low insertion loss: 0.38dB typical @ 2.7GHz Max input RF power of 38.5dBm Excellent linearity and harmonic performance No DC blocking capacitors in typical application

Datasheet :
Preview - AW12022HQNR - Datasheet
Ref.Price
  • 1-99￥2.03
  • 100-249￥1.66
  • 250-499￥1.34
  • 500-999￥1.05
  • 1000+￥0.81

Product details

Frequency (GHz) 0.1~6
Switch Feature DPDT
Control Interface GPIO
VDD (Min) (V) 1.65
VDD (Max) (V) 3.3
VIO (Min) (V) /
VIO (Max) (V) /
P0.1dB (dBm) 38.5
IL (Min) (dB) 0.27
IL (Max) (dB) 0.65
ISO (Max) (dB) 33
ISO (Min) (dB) 17
Temperature -40℃~105℃
Package (mm) QFN 1.5X1.1-10L
WBQFN 1.5X1.1-10L(0.45)
The AW12022HQNR is a Silicon-On-Insulator(SOI) DPDT switch with low insertion loss and high Isolation. It can be used to support band switching and mode switching for cellular 4G/5G, data cards and tablets. The symmetrical design of internal ports makes it convenient for PCB routing and adjustment of receiving and transmitting signals. The band/mode switching is realized by the GPIO pin as referenced in the chip block diagram and the control logic. The chip allows power-supply voltages from 1.65V to 3.3V and the positive control voltages from 0.75V to VDD.
0.1-6GHz DPDT Antenna Cross Switch

Technical documentation
Type
Title
Date
Datasheet DS_AW12022HQNR_EN_V1.0   2024-05-24
Product Design Guide AW12022HQNR Hardware Design Guide   2024-07-02

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

Evaluation board

AW12X22_EVB_V1.3 — This EVB is used to evaluate the performance of DPDT, including S-parameters, harmonics, P0.1dB, and other metrics.

Performance Evaluation for DPDT Switches with GPIO Interface

View options
Hardware development

Evaluation board

AW12X22_EVB_V1.3 — This EVB is used to evaluate the performance of DPDT, including S-parameters, harmonics, P0.1dB, and other metrics.

Performance Evaluation for DPDT Switches with GPIO Interface

View options