EN

AWP35142CDNR

带压摆率控制的 6A 双通道超低导通电阻负载开关

Product details

Parameters

Channel 2
Controlled Slew Rate YES
Enable Logic Active High
Output Discharge YES
Reverse Current Block NO
TR (μs) Adjustable
Max Continuous Current (A) 6
Ron (mΩ) 26
Power Supply (Min) (V) 2.5
Power Supply (Max) (V) 5.5
Temperature -40℃~105℃
IO Level (V) 1.8
Package (mm) DFN 3X2-14L

Package | Pins | Size

DFN 3X2-14L

Features

集成双通道 NMOS 负载开关 输入电压:VIN=0.6V 至 VBIAS VBIAS电压:2.5V 至 5.5V 导通电阻 — Ron=26mΩ(典型值)条件:VBIAS=5V 且 VIN=0.6V 至 5V — Ron=27mΩ(典型值)条件:VBIAS=2.5V 且 VIN=0.6V 至 2.5V 每通道最大 6A 连续电流 静态电流 — 62µA(典型值,双通道)条件:VBIAS=5V 且 VIN=5V — 31µA(典型值,单通道)条件:VBIAS=5V 且 VIN=5V 受控压摆率以限制浪涌电流 过温保护 (OTP) 快速输出放电 (QOD) DFN 3mmX2mmX0.75mm-14L 封装,带散热焊盘

Description

The AWP35142C is a dual-channel NMOS load switch with slew rate control. The device integrated a typical Ron of 26mΩ and has 6A maximum continuous switch current. Each channel has independent enable control pin ON1/ON2 which is suitable for interfacing directly with low voltage I/O ports. The AWP35142C features over temperature protection. The device shuts down when the junction temperature exceeds 160°C and return on when the temperature drops 30°C. The AWP35142C also has QOD function which can prevent the output from floating when the switch is disabled.

Technical documentation

Type
Title
Language
Date
Datasheet DS_AWP35142C_EN_V1.0 英文   2026-08-31
Product Design Guide AWP35142C Hardware Design Guide 英文   2026-10-13

Design & development

For additional terms or required resources, click any title below to view the detail page where available.