AWP35142CDNR

带压摆率控制的 6A 双通道超低导通电阻负载开关

参考价格
  • 1-99¥1.35
  • 100-249¥1.10
  • 250-499¥0.89
  • 500-999¥0.70
  • 1000+¥0.54

产品详细信息

参数

Channel 2
Controlled Slew Rate YES
Enable Logic Active High
Output Discharge YES
Reverse Current Block NO
TR (μs) Adjustable
Max Continuous Current (A) 6
Ron (mΩ) 26
Power Supply (Min) (V) 2.5
Power Supply (Max) (V) 5.5
Temperature -40℃~105℃
IO Level (V) 1.8
Package (mm) DFN 3X2-14L

封装 | 引脚 | 尺寸

DFN 3X2-14L

特性

集成双通道 NMOS 负载开关 输入电压:VIN=0.6V 至 VBIAS VBIAS电压:2.5V 至 5.5V 导通电阻 — Ron=26mΩ(典型值)条件:VBIAS=5V 且 VIN=0.6V 至 5V — Ron=27mΩ(典型值)条件:VBIAS=2.5V 且 VIN=0.6V 至 2.5V 每通道最大 6A 连续电流 静态电流 — 62µA(典型值,双通道)条件:VBIAS=5V 且 VIN=5V — 31µA(典型值,单通道)条件:VBIAS=5V 且 VIN=5V 受控压摆率以限制浪涌电流 过温保护 (OTP) 快速输出放电 (QOD) DFN 3mmX2mmX0.75mm-14L 封装,带散热焊盘

说明

The AWP35142C is a dual-channel NMOS load switch with slew rate control. The device integrated a typical Ron of 26mΩ and has 6A maximum continuous switch current. Each channel has independent enable control pin ON1/ON2 which is suitable for interfacing directly with low voltage I/O ports. The AWP35142C features over temperature protection. The device shuts down when the junction temperature exceeds 160°C and return on when the temperature drops 30°C. The AWP35142C also has QOD function which can prevent the output from floating when the switch is disabled.

技术文档

类型
项目标题
语言
日期
产品手册 DS_AWP35142C_CN_V1.0 中文   2026-08-31
产品手册 DS_AWP35142C_EN_V1.0 英文   2026-08-31
产品设计指南 AWP35142C Hardware Design Guide 英文   2026-10-13

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。