| Motor Type |
BDC Motor |
| H bridge |
1 |
| Micro Step |
- |
| VDD (Min) (V) |
1.8 |
| VDD (Max) (V) |
13 |
| Peak Current (A) |
1.9 |
| Ron (mΩ) |
340 |
| Control Mode |
PH/EN |
| CTRL IF |
HW GPIO |
| Temperature |
-40℃~85℃ |
| Function |
- |
| Package (mm) |
DFN 2X2-8L |
-Drives a DC Motor or Other Loads
-Rdson HS + LS: 340mΩ
-1.9-A Maximum Drive Current
-VDD: 1.8V to 12V Supply Voltage Range
-VCC: 1.8V to 5.5V Supply Voltage Range
-Low-Power Sleep Mode With 120-nA Maximum Sleep Current
-DFN 2mm X2mm X0.75mm-8L package
-Short-Circuit Protection
-Over-Temperature Protection
-Under-Voltage Protection
The AW8638 provides an integrated motor driver
solution for cameras, consumer products, toys, and
other low-voltage in battery-powered motion control
applications. The device can drive one dc motor in
other devices like solenoids. The output driver block
consists of N-channel power MOSFETs configured
as an H-bridge to drive the motor winding. An
internal charge pump generates needed gate drive
voltages.
The AW8638 can supply up to 1.9A of output
current. It operates on a motor power supply
voltage from 1.8V to 12V, and a device power
supply voltage of 1.8V to 5.5V.
The AW8638 has a PH-EN input interface, witch is
compatible with industry standard devices.
Internal shutdown functions are provided for Overcurrent
protection, Short-circuit protection, Undervoltage
lockout, and Over-temperature protection.
