EN
Home
>Products
/ Power management
/ OVP
/ Back to back OVP

AWP32107DNR

Over-Voltage Protection Load Switch with Ideal Diode Reverse-Current Protection

Datasheet :
Preview - AWP32107DNR - Datasheet

Product details

Parameters

Default OVP Threshold (V) 24
Number of PIN 12
Surge Protection (V) 45
Continuous current of switch IN-OUT （Max）（A） 8
Ron (mΩ) 17
Input DC Withstand Voltage (V) 38
OVP Response Time (ns) 100
Temperature -40℃~85℃
IO Level (V) 1.8
Package (mm) DFN 3X3-12L

Package | Pins | Size

DFN 3X3-12L

Features

Wide Input Voltage range from 3.4V to 23V 8A continuous current capability 20A peak current for 10ms @ 2% duty cycle VIN and VOUT are rated 38V Abs max Integrated ultra-low Ron switch: typical 17mΩ Over-Voltage Protection turn-off response: typical 100ns Ideal Diode Reverse-Current Protection (IDRCP) Programmable soft-start VIN Under-Voltage Lockout (UVLO) VIN Over-Voltage Lockout (OVLO) Over-Temperature Protection (OTP) Short Circuit Protection IEC 61000-4-2 Contact discharge:±8kV IEC 61000-4-5: 45V on VIN and VOUT, no cap Thermally enhanced DFN 3x3-12L package

Description

The AWP32107 is a high input voltage, large current and ultra-low Ron load switch bidirectional blocking. The AWP32107 is turned off very fast once the input voltage exceeds the OVP threshold to prevent damage to the protected downstream devices. The VIN and VOUT have an absolute maximum rating of 38V. The AWP32107DNR provides a default OVP threshold of 24V typical. The AWP32107 is the ideal solution for multi-port Type-C PD current sinking application. The Ideal Diode Reverse-Current Protection (IDRCP) feature prevents VIN to rise due to reverse current flow from VOUT under all conditions. An internal soft-start circuit controls inrush current due to highly capacitive loads and the slew rate can be adjusted using an external capacitor. The integrated back-to-back MOSFET offer industry’s lowest ON resistance and highest SOA to safely handle high current and wide range of output capacitances on VOUT. The AWP32107 is available in a thermally enhanced DFN 3x3-12L package which can operate over -40°C to +125 °C junction temperature range.

Technical documentation
Type
Title
Language
Date
Product Design Guide AWP32107 Hardware Design Guide 英文   2025-12-24
Datasheet DS_AWP32107_EN_V1.5 英文   2026-06-08
New product launch 【New Product Launch】AI PC Fast Charging Protection Takes Another Leap Forward! AWINIC Launches Type C OVP Series Products 英文   2026-07-04

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

Evaluation board

AWP32107DNR_EVB_V1.1 — The AWP32107DNR is an overvoltage protection (OVP) load switch with ideal diode reverse current protection. It integrates multiple functions, including input undervoltage lockout (UVLO), overtemperature protection (OTP), overvoltage protection (OVP), ideal diode reverse current blocking, short-circuit protection, programmable soft-start time, and power-good status indication. Key test points of the IC are individually accessible on the AWP32107DNR DEMO board for easy demonstration and testing.

AWP32107DNR EVB is the evaluation board for the OVP product AWP32107DN.

View options
Hardware development

Evaluation board

AWP32107DNR_EVB_V1.1 — The AWP32107DNR is an overvoltage protection (OVP) load switch with ideal diode reverse current protection. It integrates multiple functions, including input undervoltage lockout (UVLO), overtemperature protection (OTP), overvoltage protection (OVP), ideal diode reverse current blocking, short-circuit protection, programmable soft-start time, and power-good status indication. Key test points of the IC are individually accessible on the AWP32107DNR DEMO board for easy demonstration and testing.

AWP32107DNR EVB is the evaluation board for the OVP product AWP32107DN.

View options