| Global Current Level |
4 |
| Current Levels for Color-Mixing |
256 |
| Channel |
16 |
| Current Levels for Dimming |
0 |
| Charging Indicator |
NO |
| Control Interface |
IIC |
| Power Supply (Max) (V) |
5.5 |
| Global Max Current(mA) |
37 |
| IO Level (V) |
1.8 |
| Audio Sync. |
NO |
| Power Supply (Min) (V) |
2.5 |
| Auto Breath |
NO |
| Temperature |
-40℃~85℃ |
| Topology |
Linear |
| Package (mm) |
QFN 4X4-24L |
16 multi-function I/O, each for LED drive (current-source dimming) ｏｒ GPIO mode
256 steps linear dimming ｉｎ LED drive mode
Any GPIO can be configured as an input ｏｒ an output independently
Support interrupt, 8μs deglitch, low-level active
Standard I2C interface, AD1/AD0 ｓｅｌｅｃｔ I2C device address
SDA, SCL, RSTN, ａｎｄ all GPIO can accept ｉｎ 1.8V logic input
Supply shutdown function, low-level active
2.5V~5.5V power supply
AW9523B is a 16 multi-function LED driver ａｎｄ GPIO controller. Any of the 16 I/O ports can be configured as LED drive mode ｏｒ GPIO mode. Furthermore, any GPIO can be configured as an input ｏｒ an output independently.
After power on, all the 16 I/O ports are configured as GPIO output as default, which default states are set according to the I2C device address selection inputs, AD0 ａｎｄ AD1. All I/O ports configured as inputs are continuously monitored for state changes. State changes are indicated by the INTN output. When AW9523B reads GPIO state through the I2C interface, the interrupt is cleared. Interrupt has 8μs deglitch.
When the I/O ports are configured as LED drive mode, AW9523B can set the current of LED drive ｂｅｔｗｅｅｎ 0~IMAX by I2C interface, which is divided by 256 steps linear dimming. The default maximum current (IMAX) is 37mA, ａｎｄ IMAX can be changed ｉｎ GCR register.
AW9523B is available ｉｎ QFN4mm×4mm×0.75mm -24L package, ａｎｄ 2.5V~5.5V power supply.
