| Channel |
6 |
| LED Output |
0 |
| Gesture Detection |
Click<br>Slide |
| ISD (μA) |
/ |
| Istandby (μA) |
3.3 |
| Capacitance Resolution(fF) |
0.001 |
| Power Supply (Min) (V) |
1.7 |
| Power Supply (Max) (V) |
3.6 |
| Temperature |
-40℃~85℃ |
| Flash |
NO |
| Package (mm) |
DFN 3X2-14L |
1. 6-channel capacitive sensing
Self-capacitive sensing technology
Capacitance resolution down to 1aF
Maximum offset capacitance up to 220pF
Auto-Offset-Tuning (AOT)
Each Channel configurable independently
2. 400kHz I2C interface
Default address: 0x12
Address configurable via pin CS2
3. External interrupt pin INTN, open-drain output
4. Built-in brown-out reset (BOR)
5. Low power consumption
Active mode:32μA
Doze mode:8.7μA
Sleep mode:7.5μA
6. 1.7V~3.6V power supply
7. Operation temperature range: -40°C~85°C
8. WBDF 3.0mm×2.0mm×0.75mm -14L package
AW93006DNR is a 6-channel low power consumption capacitive touch and proximity controller. Each channel can be independently configured as sensor input, shield output.
Advanced self-capacitance technology is adopted, which supports parasitic capacitance compensation for each channel up to 220pF. The device has a high resolution ADC, the minimal capacitance that can be detected is as low as 1aF.
A high performance 32bit MCU is integrated by executing the firmware-program in the ROM, it implements all AFE sampling controlling and complicated data processing algorithms including signal filtering, RF noise suppression, baseline calculation, proximity status decision, etc.
With the auxiliary of DSP algorithm, the device is able to track slow environmental variations (such as temperature, humidity, etc.) and maintain high performance operation.
