EN
Home
>Products
/ Audio
/ Digital smart K
/ Digital smart K

AW88086CSR

3.2 W I2S/TDM Input, High Efficiency, Ultra-low power, Digital Smart K Audio Amplifier

Datasheet :
Preview - AW88086CSR - Datasheet

Product details

Parameters

Power Supply (Min) (V) 2.5
Power Supply (Max) (V) 5.5
Digital Supply (Min) (V) -
Digital Supply (Max) (V) -
IO Supply (Min) (V) -
IO Supply (Max) (V) -
PVDD Voltage(V) -
Boost Type /
PO(W) （8&THD=1%） 1.4W@5.0V
SPK Noise(uV) 10μV
DSP NO
Protection /
Control Interface IIC
RCV mode NO
RCV Noise(uV) 10μV
Temperature -40℃~85℃
Package (mm) WLCSP 1.403X1.183-12B

Package | Pins | Size

WLCSP 1.403X1.183-12B

Features

 High RF noise suppression, eliminate the TDD noise completely  Low noise 10V  Low current:  Operating mode：1.6mA  Standby mode：10uA  Fast turn-on times：1ms  THD+N: 0.02%  Support IDLE mode  Supports 4Ω Speaker  Extensive Pop-Click Suppression  Support spread spectrum  I2S interface：  I2S, Left-Justified and Right--Justified  Supports 1/2/4/6/8 slots  Input Sample Rates from 8kHz to 96kHz  Data Width: 16, 20, 24, 32 Bits  Power Supplies：  VDD：2.5V-5.5V  Short-Circuit Protection, Over-Temperature Protection, Under-Voltage Protection  WLCSP 1.403X1.183-12B package

Description

The AW88086 is an I2S input digital audio amplifier. Due to its 10µV noise floor and ultra-low distortion, clean listening is guaranteed. It can deliver 3.2W output power into an 4Ω speaker at 10% THD+N. AW88086 supports Normal and Super IDLE modes. When Normal IDLE mode is enabled, the quiescent current is reduced to 1mA; When Super IDLE mode is activated, the quiescent current can be lowered to 0.6 mA. The AW88086 features high RF suppression and eliminates TDD noise completely benefited from the digital audio input interface. The AW88086 support spread spectrum and edge-rate limiting to enhance EMI performance while reduces output filter size and cost. The AW88086 offers Short Circuit Protection, Over-Temperature Protection, Under-Voltage Protection to protect the device. AW88086 is available in a WLCSP 1.403X1.183-12B package.

Technical documentation
Type
Title
Language
Date
Datasheet DS_AW88086CSR_EN_V1.0 英文   2026-03-25
Product Design Guide DG_AW88086_Software_Design_Guide 英文   2026-03-27
Reliability Report AWWI-PE76-F10 Reliability Qualification Report For AW88086CSR V1.2 英文   2026-05-19

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Software development

APPLICATION SOFTWARE&FRAMEWORK

AW88086_GUI — AW88086 product tuning GUI plugin

AW88086 product tuning GUI plugin. Requires AwinicSCPV4 installed.

View options

APPLICATION SOFTWARE&FRAMEWORK

AwinicSCPV4_GUI — AwinicSCPV4 Intelligent Tuning Tool

AwinicSCPV4 is an intelligent tuning tool specifically designed for Awinic products, facilitating product configuration and debugging processes. Intuitive interface and user-friendly operation can help customers shorten development time and complete system integration quickly.

View options
Software development

APPLICATION SOFTWARE&FRAMEWORK

AW88086_GUI — AW88086 product tuning GUI plugin

AW88086 product tuning GUI plugin. Requires AwinicSCPV4 installed.

View options

APPLICATION SOFTWARE&FRAMEWORK

AwinicSCPV4_GUI — AwinicSCPV4 Intelligent Tuning Tool

AwinicSCPV4 is an intelligent tuning tool specifically designed for Awinic products, facilitating product configuration and debugging processes. Intuitive interface and user-friendly operation can help customers shorten development time and complete system integration quickly.

View options