EN
Home
>Products
/ Signal chain
/ Logic & voltage translators
/ Voltage level translators

AW39114BQNR

4-bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

Datasheet :
Preview - AW39114BQNR - Datasheet
Ref.Price
  • 1-99￥8.11
  • 100-249￥6.65
  • 250-499￥5.35
  • 500-999￥4.22
  • 1000+￥3.24

Product details

Data Rate (Max) (Mbps) 24
VCCA (Min) (V) 1.1
VCCA (Max) (V) 3.6
VCCB (Min) (V) 1.65
VCCB (Max) (V) 5.5
ICCA+ICCB (Max) (μA) 18
Channel 4
Support Open Drain Push-Pull
Temperature -40℃~85℃
Transmission Direction Auto
Package (mm) QFN 3.5X3.5-14L
WBQFN 3.5X3.5-14L(0.85)
 Voltage Level Translator Without Direction-Control Signal  Maximum Data Rates - 24Mbps (Push Pull) - 2Mbps (Open Drain)  Power Supply Range: - A Port ａｎｄ VCCA: 1.1V to 3.6 V - B Port ａｎｄ VCCB: 1.65 V to 5.5 V - VCCA ≤ VCCB  Pull Up Resistors are Integrated ｉｎ A Port ａｎｄ B Port  No Power-Supply Sequencing Required: Either VCCA ｏｒ VCCB Can be Ramped First  Support Ultra-Low Power Consumption Mode with OE Pin is Low Voltage Level  Latch -Up Performance Exceeds ±200mA Under JESD 78 Standard  WBQFN 3.5mm×3.5mm×0.85mm -14L Package
AW39114B is a 4-bit high-performance voltage-level translator without direction control signal, which is a non-inverting converter ａｎｄ can be used to convert digital signal with mixed-voltage systems. It needs two separate power supply rails, with the A ports tracks the VCCA ranging from 1.1V to 3.6 V, ａｎｄ the B ports tracks the VCCB ranging from 1.65 V to 5.5 V. This makes the chip has capabilities of support both lower ａｎｄ higher logic signal levels translation ｂｅｔｗｅｅｎ any of the 1.2V, 1.8 V, 2.5 V, 3.3 V, ａｎｄ 5 V voltage nodes. The OE input circuit is supplied by VCCA. Meanwhile, OE is recommended to be tied to GND through an external pull-down resistor to ensure all I/O to be pulled to the supply voltage. No power supply sequencing requirements means either VCCA ｏｒ VCCB can be powered up first, ａｎｄ OE should be enabled after both VCCA ａｎｄ VCCB are established.

Technical documentation
Type
Title
Date
Datasheet DS_AW39114B_EN_V1.1   2024-06-20
Product Design Guide AW39114_Hardware_Design_Guide   2025-07-21

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

Evaluation board

AW39114BQNR_EVB_V1.0 — AW39114BQNR EVB is an evaluation board for the AW39114BQNR. AW39114BQNR is a 4-bit high-performance voltage-level translator without direction control signal. It needs two separate power suppply VCCA and VCCB.

This EVB is an evaluation board suitable for voltage level translator.

View options
Hardware development

Evaluation board

AW39114BQNR_EVB_V1.0 — AW39114BQNR EVB is an evaluation board for the AW39114BQNR. AW39114BQNR is a 4-bit high-performance voltage-level translator without direction control signal. It needs two separate power suppply VCCA and VCCB.

This EVB is an evaluation board suitable for voltage level translator.

View options