EN

AW37420DNR

5V Synchronous Buck Converter

Product details

Parameters

Power Supply (Min) (V) 2.5
Power Supply (Max) (V) 5.5
IQ (μA) 35
Load Current (Max) (A) 2
Vout (Min) (V) 0.6
Vout (Max) (V) 5.5
Control Interface GPIO
EMI Optimization NO
Temperature -40℃~85℃
Special Function PWM Mode Power Good PSM Mode
Package (mm) DFN 2X2-8L

Package | Pins | Size

DFN 2X2-8L

Features

Up to 95% Efficiency 2.5V to 5.5V Input Voltage Range Adjustable Output Voltage from 0.6 V to VIN Low RDS(ON) Switches 110 mΩ / 75 mΩ 1.5MHz Typical Switching Frequency 2A Maximum Output Current Low Dropout With 100% Duty Cycle Power Save Mode for Light Load Efficiency 35μA Operating Quiescent Current Power Good Output Over Current Protection Over Temperature Protection Internal Soft Startup Available in DFN 2X2-8L, SOT23-5L and SOT23-6L Package

Description

The AW37420 is a synchronous step-down buck DC-DC converter with high efficiency and low power consumption. The device integrates switches capable of delivering an output current up to 2 A. The device operates at typically 1.5 MHz frequency pulse width modulation (PWM) at moderate to heavy load currents. At light load, the device automatically converts to Power Save Mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption less than 2 μA. The AW37420 provides an adjustable output voltage via an external resistor divider. It has internal soft start circuit to limit the inrush current during startup. Other features like over current protection, over temperature protection and power good are built-in. The device is available in DFN 2X2-8L, SOT23-5L and SOT23-6L package.

Technical documentation

Type
Title
Language
Date
Datasheet DS_AW37420_EN_V1.3 英文   2025-12-04

Design & development

For additional terms or required resources, click any title below to view the detail page where available.