| Channel |
1 |
| Control Interface |
IIC |
| Current (Max) (A) |
1.5 |
| Torch Current (Max) (A) |
0.375 |
| Flash Current Accuracy (%) |
7 |
| Flash Timer (Min) (s) |
0.04 |
| Flash Timer (Max) (s) |
1.6 |
| IO Level (V) |
1.2 |
| Temperature |
-40℃~85℃ |
| Indicator mode |
NO |
| Package (mm) |
FCQFN 1.6X1.2-10L |
1.5A Accurate and Programmable LED Driver
Flash: 2.94mA~1.5A, 256 levels 5.87mA/level
Torch: 0.73mA~375mA, 256 levels 1.47mA/level
Flash Timeout: 40ms~1.6s, 16 levels
Flash/Torch/IR Mode
Up to 83% Flash Efficiency
Optimized Flash LED Current During Low Battery Conditions (IVFM)
Hardware Flash/Torch Enable (STROBE/TORCH)
Synchronization Input for RF Power Amplifier Pulse Events (TX)
400kHz I2C: AW36518E (I2C Address=0x63)
0.4mm Pitch, FCQFN 1.6mm×1.2mm×0.55mm
-10L Package
Compatible with AW36518, AW36518A
The AW36518E is a LED flash driver that provides a high level of adjustability within a small solution size. The AW36518E utilizes a 2MHz or 4MHz fixed-frequency synchronous boost converter to provide power to the 1.5A constant current LED sources. The 256 levels current sources provide the flexibility to adjust the current of LED in Flash/Torch/IR modes. The AW36518E provides IVFM protection to prevent system reset or shutdown under low battery condition.
The AW36518E is controlled via an I2C - compatible interface. The main features of the AW36518E include: flash/torch current, flash timeout duration, IVFM and TX interrupt. The AW36518E also provides hardware flash/torch pin (STROBE/ TORCH) to control Flash/Torch events.
The 2MHz or 4MHz switching frequency options, overvoltage protection (OVP), and adjustable current limit allow for the use of tiny, low-profile inductors and 10-µF ceramic capacitors. The device operates over a -40°C to +85°C ambient temperature range.
The AW36518E is available in small 0.4mm pitch FCQFN 1.6mm×1.2mm×0.55mm -10L package.
