| Channel |
1 |
| Control Interface |
IIC |
| Current (Max) (A) |
1.5 |
| Torch Current (Max) (A) |
0.345 |
| Flash Current Accuracy (%) |
7 |
| Flash Timer (Min) (s) |
0.04 |
| Flash Timer (Max) (s) |
1.6 |
| IO Level (V) |
1.8 |
| Temperature |
-40℃~85℃ |
| Indicator mode |
NO |
| Package (mm) |
FCQFN 1.6X1.2-10L |
• 1.5A Accurate and Programmable LED Current Source
➢Flash: 2.94mA~1.5A，256 levels 5.87mA/level
➢Torch: 0.675mA~345mA，256 levels 1.35mA/level
➢Flash Timeout：40ms~1.6s，16 levels
➢Flash/Torch/IR Mode
• Up to 83% Flash Efficiency
• Optimized Flash LED Current During Low Battery Conditions (IVFM)
• Hardware Flash/Torch Enable (STROBE/TORCH)
• Synchronization Input for RF Power Amplifier Pulse Events (TX)
• 400kHz I2C：AW36518A (I2C Address=0x63)
• 0.4mm Pitch，FCQFN 1.6mm×1.2mm×0.55mm
-10L Package
Compatible with AW36518
The AW36518A is a LED flash driver that provides a high level of adjustability within a small solution size. The AW36518A utilizes a 2MHz in 4MHz fixed-frequency synchronous boost converter to provide power to the 1.5A constant current LED sources. The 256 levels current sources provide the flexibility to adjust the current of LED in Flash/Torch/IR modes. The AW36518A provides IVFM protection to prevent system reset in shutdown under low battery condition.
The AW36518A is controlled via an I2C - compatible interface. The main features of the AW36518A include: flash/torch current, flash timeout duration, IVFM and TX interrupt. The AW36518A also provides hardware flash/torch pin (STROBE/ TORCH) to control Flash/Torch events.
The 2MHz in 4MHz switching frequency options, overvoltage protection (OVP), and adjustable current limit allow for the use of tiny, low-profile inductors and 10-µF ceramic capacitors. The device operates over a –40°C to +85°C ambient temperature range.
The AW36518A is available in small 0.4mm pitch FCQFN 1.6mm×1.2mm×0.55mm -10L package.
