EN
Home
>Products
/ Power management
/ Breathing LED drivers
/ Direct breathing LED drivers

AW2028HFCR

AW2028H 3 channel LED Driver with Audio Synchronization

Datasheet :
Preview - AW2028HFCR - Datasheet
Ref.Price
  • 1-99￥8.11
  • 100-249￥6.65
  • 250-499￥5.35
  • 500-999￥4.22
  • 1000+￥3.24

Product details

Channel 3
Global Current Level 4
Current Levels for Color-Mixing 256
Current Levels for Dimming 256
Charging Indicator NO
Control Interface IIC
Power Supply (Max) (V) 5.5
Global Max Current(mA) 75
IO Level (V) 1.8
Audio Sync. YES
Power Supply (Min) (V) 2.4
Auto Breath YES
Temperature -40℃~85℃
Topology Linear
Package (mm) FCQFN 1.2X1.2-8L
FCQFN 1.2X1.2-8L
1、3-channel constant current LED driver 1.1、4- level IMAX selections: 9/18/37/75mA 1.2、256 current levels setting for each LED 1.3、Supports 256*256*256 color-mixing 2、256-level PWM dimming, 12-bit PWM resolution 3、Audio synchronization, both brightness ａｎｄ color change with audio input 3.1、Analog audio input range: 0~2.8Vpp 3.2、Pre-amplifier with AGC gain adjustable from -12dB to +26dB 3.3、8bit ADC ａｎｄ digital processing 3.4、Multiple audio-sync effects selectable 4、Automatic breathing light with flexible pattern configuration ａｎｄ running mode 4.1、three independent pattern controllers 4.2、pulses repeating, multiple colors alternative 4.3、multiple patterns running successively ｏｒ cyclically 5、400kHz fast I2C interface , 1.8V ~ 3.3V 6、Single power supply, 2.4V~5.5V 7、Low power consumption 8、FCQFN8L 1.2mmx1.2mmx0.37mm package
AW2028H is three channels constant current LED driver with audio synchronization. The max output current is 4-level selectable among 9mA, 18mA, 37mA ａｎｄ 75mA. Each LED is 256 current levels configurable so as to achieve 256*256*256 color mixing. The 256-level dimming ａｎｄ 12 bits PWM resolution create fine ａｎｄ smooth dimming effect even ｉｎ low brightness. AW2028H integrates AGC preamplifier, ADC ａｎｄ digital filter to implement the audio synchronization, which allow user to synchronize the color LED with the audio input. The LED color can be programmed to switch periodically ｏｒ vary directly with audio input signal. Multiple audio synchronization effects are configurable. Ｉｎ shut down mode, AW2028H turn off all internal circuit ａｎｄ the consumption is less than 1μA. Ｉｎ standby mode, I2C interface works ａｎｄ the consumption is less than 10μA. The device requires only 2.4V~5.5V single power supply. An I2C compatible interface ｉｎ 400kHz fast mode is provided, the device address is 65H. AW2028H is available ｉｎ a ultra-thin 8 pin FCQFN 1.2mmx1.2mmx0.37mm package.

Technical documentation
Type
Title
Date
Product Design Guide AW20XX Hardware Design Guide   2025-01-24
Datasheet DS_AW2028H_EN_V1.8   2025-08-04

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

Evaluation board

AW2028_EVB_V1.2 — AW2028_EVB_V1.2 is an LED driver chip featuring the "sound-follows-me" function, which allows for the demonstration and testing of AW2028HFCR and AW2028HSPR.

EVB evaluation board for Awinic's 3-channel LED driver with sound-activated lights

View options

Evaluation board

AW2028HFCR DEMO V1.1 — NA

NA

View options
Software development

DRIVER OR LIBRARY

AW2028_Drives — Android and other drivers for AW2028 series

Android and other drivers for AW2028 series, including example code, porting guide, debugging guide, etc

View options

DRIVER OR LIBRARY

AW2028_Drivers — Android and other drivers for AW2028 series

Android and other drivers for AW2028 series, including example code, porting guide, debugging guide, etc

View options

DRIVER OR LIBRARY

AW20XX_Driver — Android and other drivers for AW20XX series

Android and other drivers for AW20XX series, including example code, porting guide, etc.

View options

APPLICATION SOFTWARE&FRAMEWORK

MLED_Debug_Tool — AW2028 series products Tuning Tool

MLED_Debug_Tool is a highly integrated and easy-to-use tool for product configuration and debugging. Intuitive interface and user-friendly operation can help customers shorten development cycle and complete system integration quickly.

View options
Hardware development

Evaluation board

AW2028_EVB_V1.2 — AW2028_EVB_V1.2 is an LED driver chip featuring the "sound-follows-me" function, which allows for the demonstration and testing of AW2028HFCR and AW2028HSPR.

EVB evaluation board for Awinic's 3-channel LED driver with sound-activated lights

View options

Evaluation board

AW2028HFCR DEMO V1.1 — NA

NA

View options
Software development

DRIVER OR LIBRARY

AW2028_Drives — Android and other drivers for AW2028 series

Android and other drivers for AW2028 series, including example code, porting guide, debugging guide, etc

View options

DRIVER OR LIBRARY

AW2028_Drivers — Android and other drivers for AW2028 series

Android and other drivers for AW2028 series, including example code, porting guide, debugging guide, etc

View options

DRIVER OR LIBRARY

AW20XX_Driver — Android and other drivers for AW20XX series

Android and other drivers for AW20XX series, including example code, porting guide, etc.

View options

APPLICATION SOFTWARE&FRAMEWORK

MLED_Debug_Tool — AW2028 series products Tuning Tool

MLED_Debug_Tool is a highly integrated and easy-to-use tool for product configuration and debugging. Intuitive interface and user-friendly operation can help customers shorten development cycle and complete system integration quickly.

View options