| Total Max Number |
|
| Per ch Max Current (mA) |
30 |
| Control Interface |
PWM |
| Min Duty (%) |
0.2 |
| VRef_PWM |
|
| Flash Mode |
NO |
| Max Switching Frequency (MHz) |
1.1 |
| IO Level (V) |
1.8 |
| Power Supply (Min) (V) |
2.7 |
| Power Supply (Max) (V) |
5.5 |
| Temperature |
-40℃~85℃ |
| Package (mm) |
DFN 2X2-6L |
Support 0.2% PWM dimming
PWM control input for CABC operation
1.1MHz Switching Frequency
38V Over-voltage Protection for up to 10 LEDs in Series
200mV Reference Voltage
2.7V to 5.5V Input Voltage Range
Over-current and Over-temperature Protection
Built-in Soft-start Limits Inrush Current
DFN 2mmx2mmx0.75mm-6L package
The AW99610 is a white LED (WLED) driver with integrated boost converter. The boost converter runs at 1.1MHz fixed switching frequency, with an internal 40V, 2A switch FET, the AW99610 can drive one string (up to 10 LEDs) and parallel LED strings.
The full-scale WLED current can be set by the equation 200mV/RSET. RSET should be changed for parallel applications.
The current of WLED can also be set with duty cycle of PWM signal applied to the CTRL pin with 20kHz~100kHz.
AW99610 integrates built-in soft-start function to minimize the power supply inrush current. AW99610 also integrates over-current protection, LED open protection and over temperature protection(OTP) to prevent chip from entering abnormal operating conditions.
EN