EN

AW86803QNR-Q1

10-channel ForceTouch AFE

Product details

Parameters

PGA 1~2048
INTN/GPIO 16
Watch Dog YES
MCU Arm M0+
DAC (bit) 12
CTRL IF I²C/UART
Low Power Mode YES
Channel 10
Temperature -40℃~105℃
Package (mm) QFN 5X5-40L
ADC (bit) 14

Package | Pins | Size

QFN 5X5-40L

Features

24MHz ARM®CortexTM-M0+ 4KB LDROM, 60KB Flash, 16KB SRAM Selectable Gains of 1, …, 2048 100 K SPS 14-bit SAR ADC 12-bit offset calibration DAC CRC32 and High-speed divider 2 x 32-bit timer, 2 watch-dog Support 1MHz I²C, UART I²C 7-bit slave address:0x5C Max 10 analog input channel, 16 GPIO pins Power-on reset, Low voltage detection Low voltage reset and temperature detection Support In-System Programming (ISP) & In-Circuit Programming (ICP) Low power mode AEC-Q100 Temperature Range:Grade2 (-40℃~105℃) WBQFN 5.0mmX5.0mmX0.75mm-40L package

Description

AW86803QNR-Q1 is a SoC for force sensing front-end data acquisition, processing and control, which is integrated ARM®CortexTM-M0+ core. It has embedded 60k byte program flash (APROM), 4k byte boot program space LDROM, 16k byte SRAM. It integrated timer, watch dog, 1 AFE module, 1 I²C module, 1 UART module and 1 GPIO module. AW86803QNR-Q1 support ISP (In-System Programming) and ICP (In-Circuit Programming). System startup interval is configurable, It can be configured to boot from ROM, LDROM or SRAM.

Technical documentation

Type
Title
Language
Date
Product Design Guide AW8680X Software Design Guide 英文   2023-04-20
Datasheet DS_AW86803QNR-Q1_EN_V1.2 英文   2025-10-22

Design & development

For additional terms or required resources, click any title below to view the detail page where available.