EN
Home
>Products
/ Haptic
/ Haptic drivers
/ VBAT haptic

AW86210TSR-Q1

10W, 4.5V to 18V, High efficiency Class D Haptic Driver IC For LRA and Solenoid

Datasheet :
Preview - AW86210TSR-Q1 - Datasheet

Product details

Parameters

Voltage Type Vbat
Vout (Max) (V) 18
SRAM (kB) 0
Istandby (μA) 12
IO Level (V) 1.8 3.3
AAE NO
Input Signal Line in
LRA Calibration NA
Temperature -40℃~125℃
TikTap NO
Package (mm) ETSSOP-16L

Package | Pins | Size

ETSSOP-16L

Features

 Wide Voltage Range: 4.5V – 18V  15mA Idle Current in Low-Loss Mode  Analog input  PWM 400KHz/500KHz switching PWM  Output Power 1X10W@4Ω，14.4V，THD+N＜1%  Overall efficiency up to 83%  Support 1.8V&3.3V&5V I2C-bus control interface  45V Load-Dump Protection per ISO-7637-2  Integrated self-protection：  Over-voltage and Under-voltage protection  Over-temperature protection  DC-detect protection  Short-circuit protection  Load Diagnostic Functions：  Output to Power  Output to GND  Shorted Output Load  Open Output Load  Qualified for Automotive Applications  AEC-Q100 qualified for automotive applications Temperature grade 1: –40°C to +125°C  Meet CISPR25-L5 EMC specification  Mono BTL Class-D Power Amplifier

Description

The AW86210TSR-Q1 device is a high-current haptic driver specifically designed for inductive loads, such as solenoids and LRA. It is an I2C-controlled Class D mono-channel high-efficiency power amplifier, featuring a complete H-bridge in its output stage and capable of delivering a peak current of 5A. In Low-Loss mode, it consumes a low idle current. AW86210TSR-Q1 improves the heat dissipation capacity of the package to ensure that the chip can work normally at high temperature. The AW86210TSR-Q1 features the EEE (Enhanced Emission Elimination) function which greatly reduces EMI over the full bandwidth. The AW86210TSR-Q1 built-in over-voltage, under-voltage protection, DC protection, thermal protection, short-circuit protection and load dump protection, effectively prevent it from being damaged. With load diagnosis function, the load status can be reported through the I2C.

Technical documentation
Type
Title
Language
Date
Datasheet DS_AW86210TSR-Q1_EN_V1.0 英文   2025-11-14

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

Evaluation board

AW86210TSR-Q1_EVB_DB_V4.0 — AW37004DNR EVB is a 7-ch integrated LDO PMIC test board，include 2-ch DVDD, 5-ch AVDD, the main test points of the chip are drawn separately on the EVB board for convenient testing

EVB evaluation board for LDO PMIC AW37007

View options
Software development

APPLICATION SOFTWARE&FRAMEWORK

Haptic_M483KIDAE_MCU_FW — MCU common firmware for haptic EVB

MCU firmware for haptic EVB

View options

APPLICATION SOFTWARE&FRAMEWORK

AW86210_GUI — AW86210 product tuning GUI plugin

AW86210 product tuning GUI plugin. Requires AwinicSCPV4 installed.

View options
Hardware development

Evaluation board

AW86210TSR-Q1_EVB_DB_V4.0 — AW37004DNR EVB is a 7-ch integrated LDO PMIC test board，include 2-ch DVDD, 5-ch AVDD, the main test points of the chip are drawn separately on the EVB board for convenient testing

EVB evaluation board for LDO PMIC AW37007

View options
Software development

APPLICATION SOFTWARE&FRAMEWORK

Haptic_M483KIDAE_MCU_FW — MCU common firmware for haptic EVB

MCU firmware for haptic EVB

View options

APPLICATION SOFTWARE&FRAMEWORK

AW86210_GUI — AW86210 product tuning GUI plugin

AW86210 product tuning GUI plugin. Requires AwinicSCPV4 installed.

View options