| Actuator Type |
AP-OIS |
| Output I(mA) |
±150 |
| VDD (Max) (V) |
3.6 |
| VDD (Min) (V) |
1.8 |
| I2C (Hz) |
400K
1M
3.4M |
| I2C Addr |
Configurable |
| IQ (mA) |
6.4 |
| ISD (μA) |
9 |
| Temperature |
-40℃~85℃ |
| Control Mode |
CL PID |
| ADC (bit) |
14 |
| Package (mm) |
WLCSP 2.15X0.6-6B |
Supply Voltage : 1.8V to 3.6V
2-wire Serial Interface(I2C)
♦ Support Private / Broadcast Communication
♦ Support Frequency Up to 3.4MHz
♦ Support 1.2V / 1.8V I2C Interface
♦ Support Automatic Address Recognition
Built-in Constant Current Driver
♦ ±150mA Current
♦ 13-bit DAC
Built-in Hall Sensor
♦ Si Hall Sensor
♦ 8-level Hall Sensor Signal Amplification
♦ Support Hall Sensor Calibration
Built-in A/D converter
♦ 14-bit Resolution
♦ Support Temperature and Hall Sampling
Built-in 512 Bytes eFlash for User
Built-in PID Controller
♦ PID Coefficients can be Specified by I2C
♦ Support Multi-scenes Application
Filter Coefficients can be Specified by I2C
Support Linearization Calibration
Support Real-time Detection of Vibration Status
Package
♦ WLCSP 0.600mm x 2.150mm x 0.335mm-6B
AW86033 is an optical image stabilization (OIS) controller and close loop driver chip, which integrated a constant current driver. The default output current is ±150mA. The supply voltage range is from 1.8V to 3.6V.
AW86033 is controlled through the I2C serial interface that operates at clock rate up to 3.4MHz. The I2C device address can be configured by eFlash. The default address is 0x6C (7-bit).
AW86033 includes internal hall, 512 Bytes eFlash for user, digital PID controller, digital filter, A/D converter, D/A converter, and linearization calibration algorithm.
AW86033 can be used for auto focus or optical image stabilization applications in mobile cameras, digital cameras, camcorders, security cameras, web cameras and action cameras.
EN