EN

AW86026HCSR

High-precision VCM Close Loop IC

Product details

Parameters

Actuator Type CL AF
Output I(mA) 300
VDD (Max) (V) 5.25
VDD (Min) (V) 1.7
I2C (Hz) 100K 400K 1M 3.4M
I2C Addr 0x6A
IQ (mA) 6.5
ISD (μA) 20
Temperature -40℃~85℃
Control Mode Close loop
ADC (bit) 16
Package (mm) WLCSP 1.50X0.86-6B

Package | Pins | Size

WLCSP 1.50X0.86-6B

Features

Features Power On Supply Voltage : 2.6V to 5.25V Dynamic Voltage Range : 1.7V to 5.25V 2-wire Serial Interface ♦ Support Private / Multi-cast Communication ♦ Support 1.2V/1.8V I2C Interface ♦ Support I2C Frequency Up to 3.4MHz ♦ Support I3C Frequency Up to 6.25MHz ♦ Support Automatic Static Address Recognition Up to 4 Chips Built-in Constant Current Driver ♦ ±300mA Current (default),MAX: ±300mA ♦ Optional current: ±150 mA, ±200 mA and ±250 mA. ♦ 13-bit DAC Built-in Hall Sensor ♦ Si Hall Sensor ♦ Support Hall Sensor Calibration Built-in A/D converter ♦ 16-bit Resolution ♦ Support Temperature and Hall Sampling Built-in 2K Bytes e-Flash, 16 Bytes free access memory, 1.4K bytes for user. Built-in PID Controller ♦ Support Multi-scenes Application Support Linearization Calibration Package WLCSP 1.50mm x 0.86mm x 0.265mm-6B

Description

General Description 1.AW86026H is a Bi-directional voice coil motor close loop driver chip, which integrates a constant current driver. 2.The AW86026H slave address can be configured by e-Flash. The default address is 0xD4 (7-bit 0x6A). 3.AW86026H integrates hall sensor. The hall sensor contains temperature correction algorithm and offset cancel circuit. 4.AW86026H integrates PID controller and digital filter circuit, the coefficients of PID and filter are all high precision floating-point format. These coefficients can be configured in two ways: 1) automatically loaded (Auto-load), 2) I2C configuration. 5.AW86026H contains e-Flash and Cache. e-Flash storage area size is 1.4K bytes for user.

Technical documentation

Type
Title
Language
Date
Datasheet DS_AW86026H_EN_V1.1 英文   2026-06-30
Product Design Guide AW86026HCSR Hardware Design Guide 英文   2026-07-30

Design & development

For additional terms or required resources, click any title below to view the detail page where available.