| PVDD Voltage(V) |
25 |
| Boost Type |
|
| PO |
4x80@25V |
| Protection |
/ |
| Control Interface |
IIC |
| Temperature |
-40℃~105℃ |
| Package (mm) |
PQFP 10X10-64L |
AEC-Q100 Qualified for Automotive Applications
– Temperature Grade 2: –40°C to +105°C, TA
Wide Supply Voltage Range: 4.5V – 25V
Interface of the audio input
Support I2S, 4/8/16 slots TDM
Input Sample Rates:44.1/48/96/192kHz
Low latency signal path < 100μs
performance of the audio output
Up to 2.1MHz Output Switching Frequency
Output Power:
·4X23W@4Ω, 14.4V, THD+N=1%
·4X29W@4Ω, 14.4V, THD+N=10%
·4X50W@2Ω, 14.4V, THD+N=10%
·4X65W@4Ω, 25V, THD+N=1%
·4X80W@4Ω, 25V, THD+N=10%
Support 4Ω, 2Ωload with Parallel BTL
High Resolution Bandwidth Up to 80kHz(I2S 192kHz)
Low noise:11μV, A-weighting, GV=GV1
THD+N: 0.01% at 1kHz, Po=1W
Integrated self-protection：
– Over Voltage and Under Voltage Protection
– Over Temperature Protection
– Temperature Warning Protection
– DC Offset Protection
– Short Circuit Protection
– Over Current Protection
– Load Dump Protection(40V)
AC and DC Load Diagnostic Functions：
Output Short to Power or GND
Shorted Output or Open Output Load
Selectable internal or external generated tones for AC Load Diagnostic
Thermal warning and over temperature protection
Real Time Current Sense
Legacy Mode without I2C Control
LQFP 10X10-64L package(exposed pad up)
AW85601 is a digital input 4 channel automotive Class D audio amplifier with I2C control that delivers up to 80W of power at 25V power with 4Ω load and up to 10% THD+N, designed for high-performance LC feedback architecture of automotive audio and video products. The output noise of the amplifier is as low as 11μV to achieve extremely high signal-to-noise ratio, and the full power range output distortion is not affected by the nonlinearity of LC devices, achieving an excellent level. The output switching frequency can reach up to 2.1MHz, and the extremely high working frequency can eliminates the AM-band interference and reduces output filter size and cost. AW85601 support spread spectrum to enhance EMI performance.
AW85601 supports all AC and DC diagnostic requirements to adapt to all diagnostic scenarios. The device uses a compact and lightweight LQFP 10X10-64L package(exposed pad up) for better use by customers in multi-channel power amplifier design.
EN