| Load Current (Max) (mA) |
1000 |
| Power Supply (Min) (V) |
1.9 |
| Power Supply (Max) (V) |
5.5 |
| Vout (Min) (V) |
1.2 |
| Vout (Max) (V) |
3.3 |
| Iq (Typ) (μA) |
85 |
| Vdropout (mV) |
214@1A,Vout=1.8V
127@1A,Vout=3.3V |
| PSRR @1KHz(dB) |
82@30mA |
| Output Noise (μVrms) |
26@30mA |
| Discharge |
YES |
| Output options |
Fixed
ADJ |
| Temperature |
-40℃~85℃ |
| IO Level (V) |
1.8 |
| Package (mm) |
DFN 1.6X1.2-8L |
Input voltage range: 1.9V to 5.5V
Fixed outputs of 1.2V, 1.8V, 3.0V, 3.3V
Rated output current: 1A, when VIN - VOUT(SET)>1V rated output current reduce to 750mA
Quiescent current: typical 85uA
Typical 0.3uA shutdown current
Typical 127mV dropout voltage at 1A load , VOUT=3.3V
Power supply rejection ratio: typical 82dB (IOUT=30mA, freq=1kHz)
Noise: typical 26uVrms (IOUT=30mA, BW=10Hz to 100kHz)
Built-in output short protection: typical 130mA when output short to ground
Output auto discharge function
WBDFN 1.6mmX1.2mmX0.37mm-8L package
AW3707DXXX is a low dropout voltage regulator featuring low ON resistance, high PSRR, low Noise, good load/line transient response and smooth soft-start.
AW3707DXXX integrates current limit, short circuit protection, thermal shutdown, sufficiently protecting IC from being damaged.Meanwhile AW3707DXXX integrates a reverse current protection circuit.
AW3707DXXX is designed to work with a 1uF or more input ceramic capacitor and a or more output ceramic capacitor. The low power dissipation and good dynamic response make AW3707DXXX very suitable for hand-held communication equipment. Tiny package makes high density mounting of the IC on boards possible.