EN

AW3640DNR

200mA 1-Wire Configurable Front Flash LED Driver with Ultra Small Package

Product details

Parameters

Channel 1
Control Interface one-wire
Current (Max) (A) 0.2
Torch Current (Max) (A) 0.2
Flash Current Accuracy (%) 15
Flash Timer (Min) (s) /
Flash Timer (Max) (s) /
IO Level (V) 1.8
Temperature -40℃~85℃
Indicator mode NO
Package (mm) DFN 1.5X1.0-6L

Package | Pins | Size

DFN 1.5X1.0-6L

Features

•Front Flash LED Driving
•200mA Maximum Flash Current
•16 Steps Current 1-wire Pulse Configurable, 12.5mA/step
•LED Current Accuracy: ±15%
•Low Dropout Voltage: 65mV@200mA (Typ.)
•Efficiency: 94% (VIN=3.6V, VF=3.4V)
•Shutdown Current: <0.1μA
•Ultra Small 1.5×1.0×0.55mm3 DFN-6L Package

Description

AW3640 is a low voltage-drop current sink LED driver, which supports both Torch and Flash modes. The current-regulation sink integrated in the chip make the LED current capable of keeping constant when input voltage, LED forward voltage in temperature changing. The LED current can be adjusted among 16 steps by sending 1-wire pulse into the EN pin, and the maximum value is 200mA.
AW3640 is available in an ultra small 1.5mm× 1.0mm×0.55mm DFN-6L package. And only one multi-layer ceramic capacitor is needed for the peripheral of the solution.
In shut down mode, AW3640 turns off all internal circuit and the consumption is less than 0.1μA.
The device requires 2.8V~5.5V input voltage range and an operating temperature range of -40~85℃.

Technical documentation

Type
Title
Language
Date
Datasheet DS_AW3640_EN_V1.3 英文   2023-06-07

Design & development

For additional terms or required resources, click any title below to view the detail page where available.