EN

AW36404DNR

400mA 1-Wire Configurable Front Flash LED Driver

Product details

Parameters

Channel 1
Control Interface one-wire
Current (Max) (A) 0.4
Torch Current (Max) (A) 0.4
Flash Current Accuracy (%) 8
Flash Timer (Min) (s) 1.2
Flash Timer (Max) (s) 1.2
IO Level (V) 1.8
Temperature -40℃~85℃
Indicator mode NO
Package (mm) DFN 1.5X1.5-8L

Package | Pins | Size

DFN 1.5X1.5-8L

Features

•Front Flash LED Driving
•400mA Maximum Flash/Torch Current
•64 LED Current Levels Selectable by 1-wire Interface
•Flash Timeout Protection: 1.2s
•LED Current Accuracy: ±8%
•Low Dropout Voltage: 100mV@400mA
•LED Short Protection
•Under Voltage Lock Out (UVLO)
•Over Thermal Protection(OTP)
•DFN 1.5×1.5×0.55(mm)-8L Package
•Compatible with AW36406

Description

The AW36404 is a low voltage-drop current sink LED driver, which supports both flash and torch modes. The current-regulation sink integrated in the chip makes the LED current be capable of keeping constant when input voltage, LED forward voltage in temperature are changing. The LED current can be adjusted among 64 steps by sending 1-wire pulses into the EN pin, and the maximum value is 400mA.
For AW36404, only one multi-layer ceramic capacitor is needed for the peripheral of the solution.
In shut down mode, the AW36404 turns off all internal circuit and the consumption is less than 1μA.
The device requires 2.7V~5.5V input voltage range and an operating temperature range of -40℃~85℃.

Technical documentation

Type
Title
Language
Date
Datasheet DS_AW36404_EN_V1.4 英文   2023-06-13

Design & development

For additional terms or required resources, click any title below to view the detail page where available.