EN

AW32MF021CBQNR

32-bit 96MHZ 通用MCU

Product details

Parameters

Core Arm® Cortex®­M0
fₘₐₓ(MHz) 96
Flash(KB) 128
RAM(KB) 8
Dataflash(KB) 0
I/O 29
DIV Y
DMA Y
CRC Y
Adv Timer 2*16bit 4ch
GP Timer 1*16bit and 1*32bit
Ba Timer 2*16bit
LP Timer -
WDG 1*IWDG and 1*WWDG
RTC -
U(S)ART 3
LP UART -
I2C 1
I3C(Slave/Master) -
SPI 2
I2S 2
USB2.0 -
CAN2.0B -
LIN -
ADC(ch、bit、Msps) 2*16ch 12bit 3Msps
DAC 1
COMP 3
OPA 3
PGA -
VS -
IEXC -
CAP -
Segment LCD -
LED/RGB -
Package QFN 6X6-48L
Package Size 7mm x 7mm Pitch 0.5mm
VDD(V) 2.0~5.5
Temp(℃) -40~105
Special Features Single instruction cycle 32-bit hardware multiplier Hardware divider (32Bit) Hardware square root module (32Bit)

Package | Pins | Size

QFN 6X6-48L

Features

1. 内核与系统 1.1. Arm® Cortex®­M0 32 位微控制器 1.2. 最高工作频率可达 96MHz 1.3. 单指令周期 32 位硬件乘法器 1.4. 硬件除法器 (32Bit) 1.5. 硬件开方 (32bit) 2. 存储器 2.1. 高达 128KB 的 Flash 程序存储器 2.2. 高达 8KB SRAM

Description

This product incorporates a high-performance 32-bit microcontroller with Arm® Cortex®-M0 as the core, a LDO regulator with 5V of output voltage, and triple N­channel half­bridge gate drivers with bootstrap diodes. The highest operating frequency is up to 96MHz. It has built-in high-speed memory, rich I/O ports and peripherals which are connected to the external bus. This product contains up to two 3Msps 12-bit ADC, one DAC, three comparators, three operational amplifiers, one 16-bit general-purpose timer, one 32-bit general-purpose timer, three 16-bit basic timers and two 16-bit advanced control timers. It also contains standard communication interfaces: one I2C interface, two SPI interfaces and three UART interfaces.

Technical documentation

Type
Title
Language
Date
Product Design Guide AW32MF021CB Software Design Guide 英文   2026-07-08
Datasheet DS_AW32MF021CB_EN_V1.3 英文   2026-10-19

Design & development

For additional terms or required resources, click any title below to view the detail page where available.