EN

AW32MF010F6QNR

32-bit 60MHZ 通用MCU

Product details

Parameters

Core Arm® Cortex®­M0
fₘₐₓ(MHz) 60
Flash(KB) 32
RAM(KB) 4
Dataflash(KB) 3
I/O 26
DIV Y
DMA Y
CRC Y
Adv Timer 1*16bit 4ch
GP Timer 1*32bit
Ba Timer 2*16bit
LP Timer -
WDG 1*IWDG
RTC -
U(S)ART Y
LP UART -
I2C -
I3C(Slave/Master) -
SPI Y
I2S -
USB2.0 -
CAN2.0B -
LIN -
ADC(ch、bit、Msps) 1* 11ch 12bit 1 Msps
DAC Y
COMP 2
OPA 2
PGA -
VS -
IEXC -
CAP -
Segment LCD -
LED/RGB -
Package QFN 3X3-20L
Package Size 3mm x 3mm Pitch 0.4mm
VDD(V) 2.5~5.5
Temp(℃) -40~105
Special Features -

Package | Pins | Size

QFN 3X3-20L

Features

1、 内核与系统 1.1、 Arm® Cortex®M0 32 位微控制器 1.2、 最高工作频率可达 60MHz 1.3、硬件除法器 (32Bit) 1.4、2 通道DMA 2、存储器 2.1、高达 32KB 的 Flash 程序存储器 2.2、高达 4KB SRAM 2.3、3KB的独立Flash空间可用于程序存储或者数据存储 3、时钟、复位和电源管理 3.1、 2.5V ∼ 5.5V 供电 3.2、上电/断电复位 (POR/PDR)、可编程电压监测器 (PVD) 3.3、内嵌经出厂调校的 60MHz 高速 RC 振荡器 3.4、40KHz的LSI

Description

The AW32MF010F6 series is a high-performance 32-bit motion control MCU under MindSPIN. It uses the Cortex®-M0 core with a maximum operating frequency of up to 60MHz. It features a built-in 32KB high-speed memory and up to 26 GPIO pins. The MCU integrates one channel of 12-bit analog-to-digital converter (ADC), two channels of analog comparators (COMP), two channels of operational amplifiers (OPAMP), one 32-bit general-purpose timer, three 16-bit basic timers, and one 16-bit advanced timer. It also provides one USART interface that can be used for UART or SPI communication.

Technical documentation

Type
Title
Language
Date
Product Design Guide AW32MF010F6 Software Design Guide 英文   2026-07-08
Datasheet DS_AW32MF010F6_EN_V1.3 英文   2026-10-19

Design & development

For additional terms or required resources, click any title below to view the detail page where available.