AWS79062SPR

10MHz低噪声RRIO CMOS运算放大器

产品手册：

在线预览 - AWS79062SPR - 产品手册在线预览 - AWS79062SPR - 产品手册

参考价格

1-99￥2.50
100-249￥2.05
250-499￥1.65
500-999￥1.30
1000+￥1.00

产品详细信息

参数

Channel	2
Power Supply (Min) (V)	1.8
Power Supply (Max) (V)	5.5
Vos@25℃ (Max) (mV)	1.6
Vos TC (Typ) (µV/℃)	0.5
GBW (Typ) (MHz)	10
Slew rate (Typ) (V/us)	13
Iq per channel (Typ) (mA)	0.85
Vn @ 1 kHz (Typ) (nV/rtHz)	13
CMRR (Typ) (dB)	99
Rail-to-rail	in,out
Temperature	-40℃~125℃
IB (Typ) (pA)	1
Package	SOP-8L

封装 | 引脚 | 尺寸

SOP-8L

特性

宽电源电压范围: 1.8V ~ 5.5V 低输入失调电压: ± 0.4mV 转换率: 13V/μ s 低输入偏置电流: 1pA 低宽带噪声: 13nV/√Hz 低静态电流: 850μA/CH 轨到轨输入和输出带宽: 10MHz 灌电流和源电流能力: 50mA

说明

The AWS7906X is a high precision, low-power, low-voltage (1.8V to 5.5V) operational amplifiers with rail-to-rail input and output swing capabilities, which makes it ideal to general-purpose applications. This op amp features very good AC performance with a gain-bandwidth product of 10MHz, slew rate of 13V/μs and low input voltage noise of 3.8μVpp, while drawing 850μA per channel (typical) quiescent current. It has an input common-mode voltage range that extends to each supply rail, and its outputs swing to within 27mV of the supply rails with a 2kΩ load. The AWS7906X provides an appropriate solution for space-constrained applications such as battery powered IoT devices, wearable electronics, and personal electronics where minimum PCB footprint is required.

技术文档

类型	项目标题	语言	日期
产品设计指南	AWS7906X 硬件设计指南	中文	2025-12-26
产品设计指南	AWS7906X Hardware Design Guide	英文	2026-05-20
产品设计指南	AWS79062_Hardware_Design_Guide	中文	2026-07-08
产品手册	DS_AWS7906X_CN_V2.0	中文	2026-08-18
产品手册	DS_AWS7906X_EN_V2.0	英文	2026-08-18

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

AWS790X2SPR EVB V1.0 — AWS790X2SPR EVB是艾为一款通用双通道运算放大器测试板，适用AWS79062SPR，AWS79062CSPR，AWS72262SPR和AWS72272SPR四个料号。

适用于双通道运算放大器AWS790X2SPR系列的EVB评估板。

了解详情

硬件开发

评估板

AWS790X2SPR EVB V1.0 — AWS790X2SPR EVB是艾为一款通用双通道运算放大器测试板，适用AWS79062SPR，AWS79062CSPR，AWS72262SPR和AWS72272SPR四个料号。

适用于双通道运算放大器AWS790X2SPR系列的EVB评估板。

了解详情