| Voltage Type |
Boost |
| Vout (Max) (V) |
10.5 |
| SRAM (kB) |
8 |
| Istandby (μA) |
8 |
| IO Level (V) |
1.8
3.3 |
| AAE |
NO |
| Input Signal |
IIC
3TRIG |
| LRA Calibration |
LCC1.0 |
| Temperature |
-40℃~85℃ |
| TikTap |
YES |
| Package (mm) |
FCQFN 2X3-20L |
1MHz I2C Bus Control(Address: 0x5A/0x5B)
LRA Resonant Frequency Detect and Tracking Option
LRA Fault Diagnostics based on Resistance
Drive Compensation Over Battery Discharge
Integrated 8-KByte Internal Waveform Memory
Up to 4-KByte Configurable FIFO Interface
Flexible Playback Modes:
Real Time Playback, Memory Playback, Hardware Trigger Playback and CONT Playback
1.2ms Fast Start Up Time
Support ≥ 16Ω LRA
Up to 3 Hardware Pins Trigger Input
Dedicated Interrupt Output Pin
High Voltage H-Bridge Driver
Integrated Boost Output Voltage up to 10.5V
Support Automatically Switch to Standby Mode
Standby Current: 8μA
Shutdown Current: 0.2μA
3V to 5.5V Supply Voltage Range
Short-Circuit Protection, Over-Temperature Protection, Under-Voltage Protection
FCQFN 3mm x 2mm x 0.55mm -20L Package
The AW8695 is the high voltage H-bridge, single chip LRA haptic driver, with LRA resonant frequency detect and tracking, with an integrated boost converter and integrated waveform memory, supporting real time playback and hardware pin trigger playback. Maximum drive voltage is up to 10.5V and a typical startup time of 1.2ms makes the AW8695 an ideal haptic driver for fast responses.
中文