EN

AW8695FCR

제품 상세 정보

매개변수

Voltage Type Boost
Vout (Max) (V) 10.5
SRAM (kB) 8
Istandby (μA) 8
IO Level (V) 1.8<br>3.3
AAE NO
Input Signal IIC<br>3TRIG
LRA Calibration LCC1.0
Temperature -40℃~85℃
TikTap YES
Package (mm) FCQFN 2X3-20L

패키지 | 핀 | 크기

FCQFN 2X3-20L

특징

1MHz I2C Bus Control(Address: 0x5A/0x5B)
LRA Resonant Frequency Detect and Tracking Option
LRA Fault Diagnostics based on Resistance
Drive Compensation Over Battery Discharge
Integrated 8-KByte Internal Waveform Memory
Up to 4-KByte Configurable FIFO Interface
Flexible Playback Modes:
Real Time Playback, Memory Playback, Hardware Trigger Playback and CONT Playback
1.2ms Fast Start Up Time
Support ≥ 16Ω LRA
Up to 3 Hardware Pins Trigger Input
Dedicated Interrupt Output Pin
High Voltage H-Bridge Driver
Integrated Boost Output Voltage up to 10.5V
Support Automatically Switch to Standby Mode
Standby Current: 8μA
Shutdown Current: 0.2μA
3V to 5.5V Supply Voltage Range
Short-Circuit Protection, Over-Temperature Protection, Under-Voltage Protection
FCQFN 3mm x 2mm x 0.55mm -20L Package

기술 문서

유형
제목
언어
날짜
Datasheet DS_AW8695_10.5V fast startup with F0 detect and tracking LRA haptic driver_EN_V2.0 英文   2023-06-06

설계 및 개발

추가 조건이나 필요한 리소스가 있는 경우, 아래 제목을 클릭하여 사용 가능한 경우 상세 페이지를 확인하세요.