||OIS:±220 / AF:±165
|VDD (Min) (V)
|VDD (Max) (V)
||OIS:CL PID / AF:VRC
- ARM 32-bit STARCU with FPU and DSP
- Frequency up to 56MHz
- 84 DMIPS, 1.5DMIPS/MHz
- 64KByte Flash Memory,
- 4KByte ROM for boot loader,
- 40KByte Program SRAM
- 8KByte Data SRAM
12-bit AD Converter, Input 4-ch
10-bit DA Converter, Output 2-ch
Hall Bias Circuit, 2-ch
2 Programmable Gain Amplifiers
SPI Master/Slave/Monitor I/F
2 I2C Master/Slave I/F
- Slave address: 0xD2/0xD3(Default)
2 General Timers and a Watch Dog Timer
Driver: Constant Current Linear Driver
- Output 2-ch for OIS, Ifull=200mA
- Output 1-ch for AF(bi−direction), Ifull=130mA
Shutdown mode with 10μA consumption
WLCSP 4.2mm × 1.3mm × 0.3mm - 27B package
The AW86006 is an optical image stabilization (OIS) controller and driver which also support open-auto focus driving. It is always used in a camera module of smart mobile phone or other camera equipment.
The AW86006 integrates an on-chip 32-bit CPU as controller, a flash memory for program and user data, an ADC with 4 channels, 2 DAC for calibrating hall sensor’s offset, 2 hall bias circuit and 3 H-Bridge drivers for OIS and AF.
There is a SPI I/F module which supports master, slave and monitor on chip. The monitor function makes it possible for multiple OIS drivers to exist one camera module. Two I2C are available, one of them is always slave.
The STARCU is Harvard structure and has own DSP and FPU. The bus for code connects flash, ROM and code SRAM and the bus for data connects data SRAM and APB bridge. With the 56 MHz clock, STARCU can provide 84DMPIS computing power for algorithm.
Typical Application Circuits