AW83118GTSR

30W, 4.5V to 26V, High efficiency Stereo Class D Audio Amplifier with Low Idle Power Dissipation

参考价格
  • 1-99¥25.00
  • 100-249¥20.50
  • 250-499¥16.50
  • 500-999¥13.00
  • 1000+¥10.00

产品详细信息

参数

Power Supply (Min) (V) 4.5
Power Supply (Max) (V) 26
Boost Type /
PO(W) (8&THD=1%) 2×30W@24V
SPK Noise(uV) 65uV@20dB
Protection /
Control Interface Hardware
Temperature -40℃~105℃
Package (mm) ETSSOP-32L

封装 | 引脚 | 尺寸

ETSSOP-32L

特性

Wide Voltage Range: 4.5V - 26V
Output Power:
- BTL mode: 2×30W@8Ω, 24V,THD+N<1%
- PBTL mode: 1×60W@4Ω, 24V,THD+N<1%
Low THD+N: 0.03% at 1W, 1kHz input, 8Ω
17mA Idle Current in Low-Loss Mode
Overall efficiency up to 94%
Multiple switching frequencies
- AM avoidance
- Master/Slave synchronization
- Up to 1.2MHz switching frequency
Programmable Power Limit
Support Spread Spectrum to Enhance EMI Performance
Support parallel BTL Mode and MONO Mode
Integrated self-protection:over-voltage, under-voltage, over-temperature, DC-detect and short-circuit protection
ETSSOP 11mm×8.1mm -32L Package

说明

AW83118G is a stereo efficient, Class-D audio power amplifier for driving speakers up to 60W/4Ω in PBTL mode. It can run 2×30W/8Ω without heat sink on a dual layer PCB. In Low-Loss mode, it consumes a low idle current, allowing for longer audio play and improved thermal performance in Speaker bar and Consumer Audio applications.

The AW83118G advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of Master/Slave mode, making it possible to synchronize multiple devices.

The AW83118G built-in over-voltage, under-voltage protection, DC protection, thermal protection and short-circuit protection, effectively prevent it from being damaged.

AW83118G is available in ETSSOP 11mm×8.1mm- 32L package.

技术文档

类型
项目标题
语言
日期
产品手册 DS_AW83118G_EN_V1.1 英文   2023-06-06
Checklist CL_XX客户_XX项目_AW83118芯片_Customer_CN_V1.1 中文   2026-02-02

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。