| Control Interface |
GPIO |
| Current Limit (Typ) (A) |
4 |
| Load Current (Max) (A) |
1.5 |
| Vout (Min) (V) |
VIN |
| Vout (Max) (V) |
6 |
| Output Type |
Adjustable |
| Temperature |
-40℃~85℃ |
| Special Function |
PWM Mode
PSM Mode
Pass-through Mode |
| Package (mm) |
WLCSP 1.253X1.253-9B |
● Input Voltage Range: 2.5V to 5.5V
● Adjustable Output Voltage: VINto 6V
±2.2% Total DC Voltage Accuracy
● IOUT≥1.5A at VOUT=5V, VIN≥3.3V
● Up to 93% Efficiency
● 35μA Quiescent Current
● 4A switching valley current limit
● Light Load Power Save Mode
● Only Three External Components Required
● Build-in OVP, OTP, UVLO, Short-circuit Protection
● True Load Disconnect During Shutdown
● WLCSP 1.253mm x 1.253mm-9B Package
The AW3615A is a large current, high-efficiency synchronous boost regulator with adjustable output voltage. With a wide input voltage range of 2.5V to 5.5V, the device supports applications powered by Li-Ion batteries with extended voltage range.
The AW3615A operates at a quasi-constant 2.5MHz switching frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. The PSM mode extends the battery life by reducing the quiescent current to 44μA (typ.) during light load operation.
The AW3615A operates in pass-through mode when input voltage is higher than output voltage. When it enters pass-through mode and the device stops switching. The rectifying PMOS constantly turns on and low-side switch constantly turns off.
AW3615A can adjust the output voltage by applying external resistors to FB pin. Otherwise, FB can be grounded and the VOUT would be set to a fixed output voltage. The AW3615A is available in a tiny WLCSP 1.253mm x 1.253mm-9B package.
中文