| Frequency(MHz) |
96 |
| Flash Size (kB) |
128 |
| RAM Size(kB) |
16 |
| Control Interface |
IIC
I3C
IIS
SPI
GPIO
CAN |
| I/O Channels |
28 |
| ADC Channels |
13 |
| Audio Sync. |
NO |
| LED Effcet Controller |
YES |
| Power Supply (Min) (V) |
2 |
| Power Supply (Max) (V) |
5.5 |
| Temperature |
-40℃~85℃ |
| package |
QFN 5X5-32L |
1、Core and system
1.1、32-bit MCU
1.2、Frequency up to 96MHz
1.3、32-bit hardware divider
2、Memory
2.1、Up to 128KB Flash.
2.2、Up to 16KB SRAM.
2.3、ISP.
3、Clock, reset and power management
3.1、POR,PDR,PVD.
3.2、Internal 8 MHz factory-trimmed RC and external 4 to 24 MHz crystal oscillator
3.3、PLL1 for system clock
3.4、PLL2 for USB and FlexCAN-FD clock
3.5、Internal 40 kHz RC calibrated oscillator and external 32.768 kHz crystal oscillator
4、Low power
4.1、Sleep mode, Stop mode, Deep Stop mode and Standby mode.
5、One DMA controller with 7 channels to support peripherals including timers, ADC, UART, LPUART, I2C, I3C, SPI, and FlexCAN-FD.
6、Total 10 timers:
6.1、One 16-bit 4-channel advanced timer (TIM1).
6.2、One 16-bit general purpose timer (TIM3) and one 32-bit general purpose timer (TIM2).
6.3、Three 16-bit basic timers (TIM14 / TIM16 / TIM17).
6.4、One 16-bit low power timer (LPTIM).
6.5、Two watchdog timers (IWDG and WWDG).
6.6、One 24-bit Systick timer.
7、One real-time clock (RTC) module.
8、Up to 28 fast I/O ports.
9、Up to 11 communication interfaces: 4 UART, 1 LPUART, 1 I2C, 1 I3C slave. 2 SPI (support I2S mode). 1 USB Device interface. 1 FlexCAN-FD interface.
10、One 12-bit Analog-to-Digital converter (ADC).
11、Two high speed analog comparators.
12、Embedded CRC engine.
13、96bit unique chip ID (UID).
14、Debug mode: Serial Wire Debug (SWD).
15、QFN 5X5-32L package.
The AW32F015 microcontrollers have a maximum clocked frequency of 96MHz, built-in 128KB Flash storage, and contain an extensive range of peripherals and I/O ports. These devices contain one 12-bit ADC, two analog comparators, one 16-bit advanced timer, one 16-bit and one 32-bit general purpose timers, three 16-bit basic timers, one low power timer and one real-time clock (RTC) module, as well as communication interfaces including one I2C, one I3C slave, two SPI or I2S, four UART, one low power UART, one USB interface and one FlexCAN-FD interface.
The operating voltage of this product series is 2.0V to 5.5V, and the operating temperature range (ambient temperature) is -40°C to 85°C. Multiple sets of power-saving modes make the design of low-power applications possible.
中文