/ 電源管理

AW32F020QNR-Q1

LIN Interface Motor Controller with MCU

製品マニュアル :

オンラインプレビュー - AW32F020QNR-Q1-英語版 - 製品マニュアル

参考価格：

1-99￥18.07
100-249￥14.81
250-499￥11.92
500-999￥9.39
1000+￥7.23

製品詳細情報

Frequency(MHz)	16
Flash Size (kB)	64
RAM Size(kB)	16
Control Interface	LIN IIC PWM SPI GPIO
I/O Channels	16
ADC Channels	4
Audio Sync.	YES
LED Effcet Controller	YES
Power Supply (Min) (V)	6
Power Supply (Max) (V)	18
Temperature	-40℃~125℃
package	QFN 5X5-32L

QFN 5X5-32L

AW32F020QNR-Q1 is a chip designed specifically for automotive window motor controllers, which can improve the convenience of debugging automotive window controls. The AW32F020QNR-Q1 integrates a 32-bit MCU. The MCU provides superior computational performance and an efficient interrupt system, while the peripheral devices use a smaller number of pins and lower power consumption. AW32F020QNR-Q1 integrates 64KB FLASH memory with erase/write protection function. The LIN communication module is integrated to support the transceiver function of LIN communication. Integrated 12-bit ADC for LED junction voltage and temperature detection, supporting 13 channels, VREF voltage can be configured to 1.2V/2.4V/3.3V. Support 4 current sinks, the maximum current of each channel is up to 60mA. Support 16-bit PWM dimming, support 80Hz~250Hz dimming frequency. Two basic timers and one WDT are integrated. 12 general GPIO ports are integrated to support PWM mode and external LIN receiver interconnection. The SWD debug interface is integrated with built-in Power on Reset (POR) and Brown out Reset (BOR) functions to effectively protect the chip. AW32F020QNR-Q1 is packaged in WBQFN 5x5-32L.

1、Operating voltage range: 6V~18V, load dump voltage: 45V 2、32-bit MCU 3、Maximum operating frequency: 16MHz 4、64KB FLASH, with erase protection function 5、16KB SRAM memory 6、4-channel 16bit PWM current sinks, maximum 60mA/channel 7、Support LED junction voltage (0V~8V) detection, support LED temperature compensation 8、12 general GPIO ports 8.1、Support PWM mode 8.2、Support external LIN transceiver multiplexing function 9、Integrated LIN transceiver, support automatic addressing function 10、Support SAE J2602/LIN2.x protocol LIN slave interface 11、1 WDT and 1 WWDG 12、2 basic Timer, 1 wakeup Timer 13、12-bit ADC converter, supporting 13 channels 13.1、Optional reference voltage (1.2V/2.4V/3.3V) 13.2、Temperature sensor 13.3、VBAT voltage detection 13.4、LED junction voltage detection 14、Support for SWD debugging 15、Support Power on Reset (POR) and Brown out Reset (BOR) function 16、Operation range: -40~125°C 17、Package: WBQFN 5x5-32L

技術文書

タイプ	プロジェクトタイトル	言語	日付
产品设计指南	AW32F020QNR-Q1 Hardware Design Guide	中文	2025-05-19
产品设计指南	DG_AW32F020QNR-Q1_Software_Design_Guide_CN_V1.0	中文	2025-07-30
产品手册	DS_AW32F020_EN_V1.1	英文	2026-02-09

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

AW32F020QNR-Q1_EVB_V1.0 — AW32F020QNR-Q1_EVB_V1.0是艾为车窗电机MCU及车窗电机应用方案评估板，可以实现车窗电机控制功能演示。

适用于LIN接口车窗控制MCU方案的评估

了解详情

评估板

AW32F020QNR-Q1_CORE_EVB_V1.0 — AW32F020QNR-Q1_CORE _EVB_V1.0是LIN接口的车载MCU的核心板。

AW32F020QNR-Q1_CORE _EVB_V1.0是LIN接口的车载MCU的核心板。

了解详情

软件开发

应用软件和框架

AW32F020_GUI — AW32F020产品的调试工具

AW32F020_GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

应用软件和框架

AW32F020_Soc_FW_V0.2.0 —

了解详情

硬件开发

评估板

AW32F020QNR-Q1_EVB_V1.0 — AW32F020QNR-Q1_EVB_V1.0是艾为车窗电机MCU及车窗电机应用方案评估板，可以实现车窗电机控制功能演示。

适用于LIN接口车窗控制MCU方案的评估

了解详情

评估板

AW32F020QNR-Q1_CORE_EVB_V1.0 — AW32F020QNR-Q1_CORE _EVB_V1.0是LIN接口的车载MCU的核心板。

AW32F020QNR-Q1_CORE _EVB_V1.0是LIN接口的车载MCU的核心板。

了解详情

软件开发

应用软件和框架

AW32F020_GUI — AW32F020产品的调试工具

AW32F020_GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

应用软件和框架

AW32F020_Soc_FW_V0.2.0 —

了解详情