AW9968DNR

High Efficiency, Support 0.3% PWM Dimming Boost WLED Driver with Flash Mode

参考价格
  • 1-99¥1.54
  • 100-249¥1.26
  • 250-499¥1.02
  • 500-999¥0.80
  • 1000+¥0.62

产品详细信息

参数

Total Max Number 5P10S
Per ch Max Current (mA) 40
Control Interface PWM
Min Duty (%) 0.3
VRef_PWM 2.25mV±30%
Flash Mode YES
Max Switching Frequency (MHz) 1.1
IO Level (V) 1.8
Power Supply (Min) (V) 2.7
Power Supply (Max) (V) 5.5
Temperature -40℃~85℃
Package (mm) DFN 2X2-6L

封装 | 引脚 | 尺寸

DFN 2X2-6L

特性

Support 0.3% PWM dimming
200mV Reference Voltage in Backlight Mode
1000mV Reference Voltage in Flash Mode
350ms Flash Mode Timer
PWM control input for CABC operation
1.1MHz Switching Frequency
38V Over-voltage Protection for up to 10 LEDs in Series
2.7V to 5.5V Input Voltage Range
Over-current and Over-temperature Protection
Built-in Soft-start Limits Inrush Current
DFN 2mm X2mm X0.75mm-6L package

说明

The AW9968 is a white LED driver with integrated boost converter. The boost converter runs at 1.1MHz fixed switching frequency, with an internal 40V, 3A switch FET, the AW9968 can drive one string (up to 10 LEDs) and parallel LED strings. And it is quite applicable for smart phone as a flash mode light source, it can drive up to 3 times of full scale backlight current for 350ms when Strobe interface is high. The full-scale WLED current can be set by the equation 200mV/RSET in backlight mode. RSET should be changed for parallel applications. AW9968 integrates built-in soft-start function to minimize the power supply inrush current. AW9968 also integrates over-current protection , LED open protection and over temperature protection(OTP) to prevent chip from entering abnormal operating conditions.

技术文档

类型
项目标题
语言
日期
产品手册 DS_AW9968_EN_V1.3 英文   2023-06-06
产品用户指南 Backlight LED EVB 用户指南 中文   2025-01-17
产品设计指南 艾为串联背光驱动系列硬件设计指南 中文   2025-01-21
产品设计指南 Series Backlight Driver Hardware Design Guide 英文   2025-08-15

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。