| Voltage Type |
Vbat |
| Vout (Max) (V) |
5.5 |
| SRAM (kB) |
8 |
| Istandby (μA) |
10 |
| IO Level (V) |
1.8
3.3 |
| AAE |
NO |
| Input Signal |
IIC
1TRIG |
| LRA Calibration |
LCC1.0 |
| Temperature |
-40℃~85℃ |
| TikTap |
YES |
| Package (mm) |
DFN 3X3-10L |
•1MHz I2C Bus Control (Address 0x5A)
•F0 detect option
•F0 tracking option
•Automatic Overdrive and Braking
•Resistance-Based LRA Diagnostics
•Drive signal monitor for LRA protect
•Drive Compensation Over Battery Discharge
•Integrated 8-KByte Internal Waveform Memory
•Up to 4-KByte configurable FIFO Interface
•Three playback mode:
Real time playback, memory playback and hardware trigger playback
•Support automatically switch to standby mode
•Standby current：10μA
•Shutdown current：0.5μA
•3V to 5.5V Supply Voltage Range
•Short-Circuit Protection, Over-Temperature Protection, Under-Voltage Protection
•DFN 3X3-10L package
AW8623 is a single chip, low cost H-bridge haptic driver IC that integrates configurable automatic overdrive and brake function, up to 8KB waveform memory, and supports real time playback, memory playback and hardware triggered playback with fast startup time. All these make it an ideal candidate for haptic driver.
中文