| Actuator Type |
Bi-OL AF |
| Output I(mA) |
200 |
| VDD (Min) (V) |
1.8 |
| VDD (Max) (V) |
3.6 |
| I2C (Hz) |
100K
400K
1M
3.4M |
| I2C Addr |
0x18 |
| IQ (mA) |
3.5 |
| ISD (μA) |
0.3 |
| DAC (Bit) |
11 |
| Temperature |
-40℃~85℃ |
| Control Mode |
open loop |
| Package (mm) |
WLCSP 0.99X0.59-6B |
Power Supply
1.8V to 3.6V power supply
Support Power On Reset(POR)
Support Power Down(PD) mode
Support Automatic Static Address Recognition Up to 2 Chips
Built-In Digital-to-Analog Convertor
11-bit Resolution DAC
Uni/Bi-Directional
Adjustable Output Current
±200mA Current(default)
The Current Range Can be Configured by Register
Fast Settling Function
Support LSC(Linear Slope Control) /VRC(VCM Ringing Control) Mode
2-Wire I2C Serial Interface
1.2V/1.8V Interface Available
Support I2C Frequency Up to 3.4MHz
Dynamic Current Compensation
Package Dimension
Small 0.4mm pitch WLCSP 0.59mm x 0.99mm x 0.265mm -6B
The AW86018H is a uni/bi-directional 2in1 voice coil motor driver chip, which contains a 11-bit DAC. The operating voltage is from 1.8V to 3.6V. While the maximum output current is totally adjustable by register setting.
The AW86018H is controlled through the I2C serial interface, and its operating frequency can reach up to 3.4MHz. The device address of the chip is default 0x18(7-bit 0x0C).
The AW86018H contains Linear Slope Control mode and VCM Ringing Control mode etc., which allow programmable configuration of output current waveform to minimize mechanical vibration for fast settling, and can be suitable for different types of voice coil motors.
The AW86018H contains power on reset circuit and power down function. The reset circuit ensures that the digital circuit works well when supply power up. The supply current consumption less than 1μA in Power Down mode.
The AW86018H can be used for auto focus applications in mobile cameras, digital still cameras, camcorders and action cameras etc.
中文