| Channel |
3 |
| Control Interface |
IIC |
| Current (Max) (A) |
1.0*2/0.375*1 |
| Torch Current (Max) (A) |
0.375 |
| Flash Current Accuracy (%) |
10 |
| Flash Timer (Min) (s) |
0.04 |
| Flash Timer (Max) (s) |
1.6 |
| IO Level (V) |
1.8 |
| Temperature |
-40℃~85℃ |
| Indicator mode |
YES |
| Package (mm) |
FCQFN 1.6X1.2-10L |
•Flash and Indicator 2in1 application
•Dual Independent 1.0A LED1/LED2 Current Source
➢Flash：3.91mA~1.0A，256 levels 3.91mA/level
➢Torch：1.46mA~375mA，256 levels 1.46mA/level
➢Indicator：0.37mA~375mA，1024 levels
0.37mA/level
➢Flash Timeout：40ms~1.6s，16 levels
•Independent 375 mA LED3 Current Sink
➢Flash：1.46mA~375mA，256 levels 1.46mA/level
➢Torch：1.46mA~375mA，256 levels 1.46mA/level
➢Indicator：0.73mA~375mA，512 levels 0.73mA/level
➢Flash Timeout：40ms~1.6s，16 levels
•Optimized Flash LED Current During Low Battery Conditions (IVFM)
•Hardware Strobe Enable (STROBE)
•400kHz I2C：AW36526（I2C Address=0x63）
•0.4mm Pitch，FCQFN-10L Package
The AW36526 is a inductorless triple channel flash & Indicator 2in1 LED driver that provides a high level of adjustability within a ultra-small solution size. The AW36526 includes two current sources and a current sink which is controlled independently by I2C-compatible interface. The AW36526 provides IVFM protection mode to prevent system reset or shutdown under low battery condition.
The AW36526 is controlled via an I2C-compatible interface. The main features of the AW36526 include: flash / torch / IR / Indicator current, flash timeout duration, IVFM and breath features. The AW36526 also provides hardware flash pin (STROBE) to control flash event.
The device operates over a –40°C to +85°C ambient temperature range.
The AW36526 is available in small 0.4mm pitch 1.6mm×1.2mm FCQFN-10L package.
