| Channel |
2 |
| Control Interface |
PWM to Analog |
| Current (Max) (A) |
1.5 |
| Torch Current (Max) (A) |
0.4 |
| Flash Current Accuracy (%) |
7 |
| Flash Timer (Min) (s) |
0.66 |
| Flash Timer (Max) (s) |
0.66 |
| IO Level (V) |
1.2 |
| Temperature |
-40℃~85℃ |
| Indicator mode |
NO |
| Package (mm) |
DFN 3X2-14L |
2.7V~5.5V Input Voltage
Drive Up Total 1.5A or 0.75A per Channel
Flash timeout: 660ms
Up to 96% Efficiency
Less than 1A Shutdown Current
2MHz Step-Up Converter
Independent Flash Mode Enable and Movie/Torch Mode Enable Pins
Thermal Regulation Control
Over-Temperature Protection
LED Open or Short Protection
Output Over-Voltage Protection
Cycle-by-Cycle Inductor Current Limit
0.4mm Pitch, WBDFN 3mm×2mm×0.75mm -14L Package
The AW36501 is a dual LED flash driver that provides a high level of adjustability within a small solution size. The AW36501 utilizes a 2MHz frequency synchronous boost converter to provide power to total 1.5A constant current LED sources. The chip support Flash mode and Movie/Torch mode, which can be configured with ENM and ENF enable pins. The maximum current of LED in Flash mode or Movie/Torch mode can be programmed by external resistors. The real LED current can be regulated through the PWM signal input from the ENM pin.
The AW36501 can improve single LED power by shorting two LED output sinks, up to 1.5A LED current for 660ms continuously. The integrated thermal regulation monitors the IC junction temperature and reduces the LED current in Flash mode to limit the IC’s temperature.
Multiple protection functions are integrated into the chip, including LED open or short protection, output over-voltage protection, cycle-by-cycle current limit protection and over-temperature protection. The chip consume less than 1A leakage current in shutdown. The AW36501 operates over -40°C to 85°C ambient temperature range.
The AW36501 is available in small 0.4mm pitch WBDFN 3mm×2mm×0.75mm -14L package.
中文
