AW36429FCR

Inductorless, Four Channel Flash LED Driver

参考价格
  • 1-99¥6.15
  • 100-249¥5.05
  • 250-499¥4.06
  • 500-999¥3.20
  • 1000+¥2.46

产品详细信息

参数

Channel 4
Control Interface IIC
Current (Max) (A) 1.0*2/0.375*2
Torch Current (Max) (A) 0.375
Flash Current Accuracy (%) 10
Flash Timer (Min) (s) 0.04
Flash Timer (Max) (s) 1.6
IO Level (V) 1.8
Temperature -40℃~85℃
Indicator mode NO
Package (mm) FCQFN 1.6X1.2-10L

封装 | 引脚 | 尺寸

FCQFN 1.6X1.2-10L

特性

•Dual Independent 1.0A LED1/LED2 Current Source
➢Flash:3.91mA~1.0A,256 levels 3.91mA/level
➢Torch:1.46mA~375mA,256 levels 1.46mA/level
➢Flash Timeout:40ms~1.6s,16 levels
•Dual Independent 375 mA LED3/LED4 Current Sink
➢Flash:1.46mA~375mA,256 levels 1.46mA/level
➢Torch:1.46mA~375mA,256 levels 1.46mA/level
➢Flash Timeout:40ms~1.6s,16 levels
•Optimized Flash LED Current During Low Battery Conditions (IVFM)
•Hardware Strobe Enable (STROBE)
•400kHz I2C:AW36429(I2C Address=0x63)
•0.4mm Pitch,FCQFN-10L Package

说明

The AW36429 is a inductorless four channel flash LED driver that provides a high level of adjustability within a ultra-small solution size. The AW36429 includes two current sources and two current sinks which are controlled independently by I2C-compatible interface. The AW36429 provides IVFM protection mode to prevent system reset or shutdown under low battery condition. The AW36429 is controlled via an I2C-compatible interface. The main features of the AW36429 include: flash / torch / IR current, flash timeout duration and IVFM. The AW36429 also provides hardware flash pin (STROBE) to control flash event. The device operates over a –40°C to +85°C ambient temperature range. The AW36429 is available in small 0.4mm pitch 1.6mm×1.2mm FCQFN-10L package.

技术文档

类型
项目标题
语言
日期
产品手册 DS_AW36429_EN_V1.3 英文   2023-06-06
产品设计指南 Flash IR LED Driver Hardware Design Guide 中文   2025-12-01

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。