/ 电源管理

/ USB保护

/ PD Phy & 控制器

AW35615PFCR

The AW35615 is a programmable DRP/SRC/SNK USB Type-C controller that compiles with USB PD3.1 and Type-C V2.4 specifications, and it integrates a complete Type-C transceiver including the pull-up and pull-down resistors.

产品手册 :

产品详细信息

DC_CC(V)	32
PD Specification	3.1
DC_VBUS(V)	32
Power Role	DRP
IO Level (V)	1.2
Package (mm)	FCQFN 1.2X1.2-9L

FCQFN 1.2X1.2-9L

USB-IF PD 3.1 certified (TID #8339) Certified by IEC-62680-1-2 and IEC-62680-1-3 Built-in hardware LPD Dual-role functionality with autonomous DRP toggle Attach/Detach detection as either a host or a device based on what has been attached Operate as dedicated host, dedicated device or DRP by host software configuration Support USB-PD 3.1 SPR and 28V EPR Mode Integrate the several functionality of the CC Pins according to Type-C 2.4 VBUS detection and discharge control Dead Battery Support (SNK mode support when no power applied) Support wake detection avoids CC voltage toggle to prevent electric corrosion BIST mode supported FCQFN 1.2 mm × 1.2 mm-9L package

The AW35615 enables the USB Type-C detection including attach and orientation by autonomous DRP toggle. The CC logic block monitors the CC1/CC2 pin for pull-up or pull-down resistances to determine when a USB port has been attached, the orientation of the cable and the role detected. Furthermore, AW35615 supports wake detection without CC voltage toggle, which brings lower power and avoids electric corrosion due to voltage toggle. The AW35615 integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 140W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification. The AW35615 supports VBUS voltage detection and discharge control by the discharge resistance integrated in VBUS channel. The withstand voltage value of CC pins is up to 28V.

技术文档

	类型	项目标题		语言		日期
	产品设计指南	DG_AW35615PFCR_Hardware_Design_Guide_CN		中文		2024-11-12
	产品手册	DS_AW35615PFCR_EN_V1.2		英文		2025-08-07

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

AW35615_EVB_V1.1 — AW35615 EVB是艾为一款USB Type-C PD Phy协议芯片测试板。

AW35615 EVB是艾为一款USB Type-C PD Phy协议芯片测试板。配合软件可以演示PD协商的完整流程。

了解详情

软件开发

应用软件和框架

AW35615_GUI — AW35615产品调试工具

AW35615 GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

驱动程序或库

AW35615_Driver_MCU_v1.2.0.zip — aw35615系列mcu平台驱动

aw35615系列mcu平台驱动，包含了示例代码、移植文档

了解详情

驱动程序或库

AW35615_Driver_MTK_Android_V1.7.4.zip — aw35615系列mtk平台驱动

aw35615系列mtk平台驱动，包含了示例代码、移植文档

了解详情

驱动程序或库

AW35615_Driver_MCU_Android_V1.3.1.zip — aw35615系列mcu平台驱动

aw35615系列mcu平台驱动，包含了示例代码、移植文档

了解详情

硬件开发

评估板

AW35615_EVB_V1.1 — AW35615 EVB是艾为一款USB Type-C PD Phy协议芯片测试板。

AW35615 EVB是艾为一款USB Type-C PD Phy协议芯片测试板。配合软件可以演示PD协商的完整流程。

了解详情

软件开发

应用软件和框架

AW35615_GUI — AW35615产品调试工具

AW35615 GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

驱动程序或库

AW35615_Driver_MCU_v1.2.0.zip — aw35615系列mcu平台驱动

aw35615系列mcu平台驱动，包含了示例代码、移植文档

了解详情

驱动程序或库

AW35615_Driver_MTK_Android_V1.7.4.zip — aw35615系列mtk平台驱动

aw35615系列mtk平台驱动，包含了示例代码、移植文档

了解详情

驱动程序或库

AW35615_Driver_MCU_Android_V1.3.1.zip — aw35615系列mcu平台驱动

aw35615系列mcu平台驱动，包含了示例代码、移植文档

了解详情