AW35019DNR

Programmable Current Limit Switches

产品手册：

在线预览 - AW35019DNR - 产品手册

参考价格

1-99￥3.85
100-249￥3.15
250-499￥2.54
500-999￥2.00
1000+￥1.54

产品详细信息

参数

Controlled Slew Rate	YES
Enable Logic	Active High
Output Discharge	YES
Programmable Current Limit	YES
Current Limit （Min）(A)	0.25
Current Limit （Max）(A)	3
Reverse Current Blocking	NO
Fault Flag	YES
Power Supply (Min) (V)	2.7
Power Supply (Max) (V)	6.5
Temperature	-40℃~85℃
IO Level (V)	/
Package (mm)	DFN 2X2-6L

封装 | 引脚 | 尺寸

WBDFN 2X2-6L(0.75)

特性

Wide input voltage range from 2.7V to 6.5V Maximum input voltage is 24V Integrated low Rdson switch: 50mΩ Programmable current limit from 250mA to 3A 3A with 7% Accuracy 250mA with 30% Accuracy 7.5V input overvoltage shutoff 150ns overvoltage lockout response 5.4V overvoltage clamp Built-ｉｎ soft start Thermal shutdown protection Fault output Enable interface pin DFN 2mmx2mm-6L Certificated by CB IEC62368-1: 2018, file no. BE-41997 Certificated by UL UL62368-1: 2014, file no. E532659

说明

AW35019 is a smart e-Fuse with robust overcurrent and overvoltage protection. The wide operating voltage allows control of many popular DC buses.
AW35019 uses N-channel MOSFET as power switch, and allows the user to program the current-limit threshold between 250mA to 3A with an external resistor when the load exceeds the current-limit threshold.
AW35019 can withstand 24V DC voltage. In the events that an incorrect voltage is ＩＮ, the output clamps to 5.4V to protect the load. If the voltage at ＩＮ exceeds 7.5V, the device disconnects the load to prevent damage to the device and/in load.
Additional features include enable, under-voltage, over-temperature, output discharge and fault flag output are provided to monitor system status.

技术文档

类型	项目标题	语言	日期
产品设计指南	AW35019 AW35019A Hardware Design Guide	中文	2023-04-24
产品手册	DS_AW35019_EN_V1.6	英文	2024-05-30
产品用户指南	AW35019_AW35019A EVB User's Guide	英文	2025-10-27

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

AW35019DNR DEMO V1.0 — 艾为过流保护芯片功能评估板

艾为过流保护芯片功能评估板

了解详情

硬件开发

评估板

AW35019DNR DEMO V1.0 — 艾为过流保护芯片功能评估板

艾为过流保护芯片功能评估板

了解详情