/ 氛围灯驱动

/ 呼吸灯驱动

/ 直驱型呼吸灯驱动

AW2016AQNR

3-Channel LED Drivers with Auto Charging Indicator

产品手册：

在线预览 - AW2016AQNR - 产品手册

参考价格

1-99￥3.65
100-249￥3.00
250-499￥2.41
500-999￥1.90
1000+￥1.46

产品详细信息

参数

Channel	3
Global Current Level	4
Current Levels for Color-Mixing	16
Current Levels for Dimming	256
Charging Indicator	Breath
Control Interface	IIC
Power Supply (Max) (V)	5.5
Global Max Current(mA)	30
IO Level (V)	1.8
Audio Sync.	NO
Power Supply (Min) (V)	2.5
Auto Breath	YES
Temperature	-40℃~85℃
Topology	Linear
Package (mm)	QFN 1.2X1.2-8L

封装 | 引脚 | 尺寸

QFN 1.2X1.2-8L

特性

3-channel constant current LED drivers 4-level global maximum current: 5mA, 10mA, 15mA, 30mA 16-level individual current for each LED, 4096 mixed-color available 256-level individual PWM dimming Automatic breathing light Three independent pattern controllers Individual and sync control selectable Support charging indication under low battery voltage condition Directly start up breathing light on LED1 via pulling pin CHRG up to high AW2016: LED1 breathing with 4.5s period, max output current 6mA AW2016A: LED1 always on, output current 3mA LED current accuracy: ±3% LED matching accuracy: ±3% Low dropout voltage: 50mV Shutdown control by pulling down pin SCL 400kHz I2C interface (address: 0x64), interface voltage 1.8V~3.3V Single power supply, 2.5V~5.5V QFN 1.2mm×1.2mm×0.37mm-8L package

说明

AW2016/AW2016A is a three channels constant current LED driver with auto charging indication function. The max output current is 4-level selectable (5mA/10mA/15mA/30mA). The driving current of each LED is 16 levels configurable so as to achieve 4096 color mixing. The 256-level exponential PWM creates fine and smooth dimming effect even in low brightness.
AW2016 can provide auto charging indication under the condition of low battery voltage. When the voltage of battery is too low, and the I2C interface halts, the internal pattern controller will be activated by pin CHRG being pulled high, and pin LED1 of AW2016 will output breathing lighting with period of 4.5s and max 6mA current. LED1 of AW2016A will be always on with 3mA constant current.
AW2016/AW2016A contain three independent pattern controllers. Three LEDs can be controlled to work synchronously in individually according to different applications.
A 400kHz I2C interface is provided with 1.8v~3.3v interface voltage. The QFN 1.2mm×1.2mm ×0.37mm -8L package occupies very small PCB area.

技术文档

类型	项目标题	语言	日期
产品设计指南	AW2016X Software Design Guide	中文	2025-01-24
产品设计指南	AW2016X Software Design Guide	英文	2025-02-07
产品设计指南	AW20XX Hardware Design Guide	英文	2025-01-24
产品设计指南	AW20XX Hardware Design Guide	中文	2025-08-12
Checklist	CL_客户_项目_3-Channel_Breathing_Led_Driver_Customer_CN_V1.0	中文	2026-02-02
产品手册	DS_AW2016_EN_V1.4	英文	2026-04-14
产品应用手册	三通道LED呼吸灯基础应用说明	中文	2026-06-25

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

3LED EVB V1.1 — 使用于艾为3路呼吸灯的EVB评估板

3LED EVB V1.1是艾为3路呼吸灯的EVB评估板，可实现3通道呼吸灯演示。

了解详情

软件开发

驱动程序或库

AW2016_Driver_QCOM_v1.0.3 — AW2016 Android驱动

AW2016包含Sample Code、移植说明、调试指南等

了解详情

应用软件和框架

Breathing_LED — 3路LED调试工具

3路LED GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

驱动程序或库

AW20XX_Driver — AW20XX系列Android和其他驱动

AW20XX 系列Android和其他驱动，包含Sample Code、移植说明、调试指南等

了解详情

硬件开发

评估板

3LED EVB V1.1 — 使用于艾为3路呼吸灯的EVB评估板

3LED EVB V1.1是艾为3路呼吸灯的EVB评估板，可实现3通道呼吸灯演示。

了解详情

软件开发

驱动程序或库

AW2016_Driver_QCOM_v1.0.3 — AW2016 Android驱动

AW2016包含Sample Code、移植说明、调试指南等

了解详情

应用软件和框架

Breathing_LED — 3路LED调试工具

3路LED GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

驱动程序或库

AW20XX_Driver — AW20XX系列Android和其他驱动

AW20XX 系列Android和其他驱动，包含Sample Code、移植说明、调试指南等

了解详情