/ 전원 관리

AW36402DNR

데이터 시트 :

제품 상세 정보

매개변수

Channel	1
Control Interface	one-wire
Current (Max) (A)	0.2
Torch Current (Max) (A)	0.2
Flash Current Accuracy (%)	8
Flash Timer (Min) (s)	/
Flash Timer (Max) (s)	/
IO Level (V)	1.8
Temperature	-40℃~85℃
Indicator mode	NO
Package (mm)	DFN 1.5X1.0-6L

패키지 | 핀 | 크기

DFN 1.5X1.0-6L

특징

The AW36402 is a low voltage-drop current sink LED driver, which supports both flash and torch applications. The current-regulation sink integrated in the chip makes the LED current be capable of keeping constant when input voltage, LED forward voltage or temperature are changing. The LED current can be adjusted among 16 steps by sending 1-wire pulses into the EN pin, and the maximum value is 200mA.
The AW36402 is available in an ultra-small 1.5mm× 1.0mm×0.55mm DFN-6 package, and only one multi-layer ceramic capacitor is needed for the peripheral of the solution.
Ｉｎ shut down mode, the AW36402 turns off all internal circuits and the consumption is less than 1μA.
The device requires 2.7V~5.5V input voltage range and an operating temperature range of -40~85℃.

기술 문서

	유형	제목		언어		날짜
	Datasheet	DS_AW36402_EN_V1.3		英文		2023-06-06
	Product Design Guide	Flash IR LED Driver Hardware Design Guide		中文		2025-12-01

설계 및 개발

추가 조건이나 필요한 리소스가 있는 경우, 아래 제목을 클릭하여 사용 가능한 경우 상세 페이지를 확인하세요.

하드웨어 개발

평가 보드

AW36402_DEMO_V1.0 — AW36402_DEMO_V1.0 is the AW36402 flash demonstration mainboard.

AW36402 Flash LED Driver Evaluation Board

옵션 보기

하드웨어 개발

평가 보드

AW36402_DEMO_V1.0 — AW36402_DEMO_V1.0 is the AW36402 flash demonstration mainboard.

AW36402 Flash LED Driver Evaluation Board

옵션 보기