/ オーディオ

AW87580FCR

10.5V Smart Adaptive Boost High Efficiency Low Noise Large Volume Smart K Audio Amplifier

製品マニュアル :

製品詳細情報

Power Supply (Min) (V)	2.5
Power Supply (Max) (V)	5.5
PVDD Voltage(V)	10.5
Boost Type	Adaptive Boost
PO(W) （8Ω&THD=1%）	5.5W@4.2V
SPK Noise(uV)	25uV@18dB
Protection	TLTR AGC
Control Interface	IIC
RCV mode	YES
RCV Noise(uV)	7uV@0dB
Temperature	-40℃~85℃
Package (mm)	FCQFN 2X3-20L

FCQFN 2X3-20L(0.55)

AW87580 is a high efficiency, low noise, low power consumption, constant large volume Smart K audio amplifier. AW87580 integrates AWINIC’s proprietary Triple-Level Triple-Rate AGC audio algorithm, effectively eliminating music noise and improving sound quality and volume. AW87580 integrates AWINIC’s proprietary Smart Adaptive Boost with efficiency up to 90% , it greatly improves efficiency at small signal, Overall efficiency up to 87% when output power is 0.5W. AW87580 noise floor is as low as to 25μV at speaker mode, with 108dB high signal-to-noise ratio (SNR). AW87580 has super volume receiver mode, it can deliver 520mW output power into an 8Ω speaker at 9μV noise. AW87580 supports speaker and receiver 2-in-1 application. Quiescent current is 5mA when VDD is equal to 3.6V. In the receiver mode, its ultra-low noise is 7μV. Class D receiver also has high PSRR performance to completely suppress TDD-noise. AW87580 built-in over current protection, over temperature protection and short circuit protection function, effectively protect the chip. AW87580 is available in a FCQFN 2.0mm X3.0mm X 0.55mm-20L package.

 Support high power receiver stereo application  Wide Voltage Range: 2.5V-5.5V  High efficiency large drive ability Smart Adaptive Boost(Patented)  Maximum boost output voltage: 10.5V  Maximum output Power: 5.5W@8Ω  Excellent quiescent current: 4.7mA@3.6V  Overall efficiency up to 87%@0.5W  Overall efficiency up to 82%@1W  Low noise：  25μV (K Speaker @18dB)  7μV (L Receiver @0dB)  Speaker & receiver 2-in-1 mode application  LRCV receiver：0dB，En=7μV，0.14W@THD+N=1%  SRCV receiver：0dB，En=9μV，0.52W@THD+N=1%  High PSRR：82dB (217Hz)  Support 1.2V&1.8V logic I2C control  Triple-Level Triple-Rate AGC algorithm to effectively eliminate noise, pure sound quality  Selectable speaker-guard power level： 0.5W~2W@8ohm, 100mW/step  Battery Brown Out Protection(BOP)  Excellent pop-click suppression  Excellent full bandwidth EMI suppression  FCQFN 2.0mmX3.0mmX0.55mm-20L package

技術文書

	タイプ	プロジェクトタイトル		言語		日付
	产品手册	DS_AW87580_EN_V1.0		英文		2024-11-08
	产品设计指南	AW87580 硬件设计指南		中文		2024-12-05

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

AW875X9 V3.0 — 适用于模拟音频功放AW87565FCR AW87559FCR AW87567FCR AW87580FCR AW87529FCR AW87579FCR AW87519FCRAW87564FCR AW87569FCR应用的EVB板（需结合模拟底板使用）

适用于模拟音频功放AW87565FCR AW87559FCR AW87567FCR AW87580FCR AW87529FCR AW87579FCR AW87519FCRAW87564FCR AW87569FCR应用的EVB板（需结合模拟底板使用）

了解详情

软件开发

驱动程序或库

AW87XXX_Driver — AW87XXX 系列Android驱动

AW87XXX系列Android驱动，包含代码、移植说明等。

了解详情

应用软件和框架

AW87580_GUI — AW87580FCR 产品调试GUI插件

AW87580FCR 产品调试GUI插件。需要安装AwinicSCPV4使用。

了解详情

应用软件和框架

AwinicSCPV4_GUI — AwinicSCPV4 智能化调试工具

AwinicSCPV4 是一款智能化调试工具，专为艾为产品设计，用于产品的配置和调试过程。直观的界面和人性化的操作可帮助客户缩短开发周期，快速的完成系统集成。

了解详情

硬件开发

评估板

AW875X9 V3.0 — 适用于模拟音频功放AW87565FCR AW87559FCR AW87567FCR AW87580FCR AW87529FCR AW87579FCR AW87519FCRAW87564FCR AW87569FCR应用的EVB板（需结合模拟底板使用）

适用于模拟音频功放AW87565FCR AW87559FCR AW87567FCR AW87580FCR AW87529FCR AW87579FCR AW87519FCRAW87564FCR AW87569FCR应用的EVB板（需结合模拟底板使用）

了解详情

软件开发

驱动程序或库

AW87XXX_Driver — AW87XXX 系列Android驱动

AW87XXX系列Android驱动，包含代码、移植说明等。

了解详情

应用软件和框架

AW87580_GUI — AW87580FCR 产品调试GUI插件

AW87580FCR 产品调试GUI插件。需要安装AwinicSCPV4使用。

了解详情

应用软件和框架

AwinicSCPV4_GUI — AwinicSCPV4 智能化调试工具

了解详情