EN

AW86102FOR

製品詳細

パラメータ

Actuator Type Piezo-OIS
Output I(mA) 输出PWM电压,不输出线性电流
VDD (Max) (V) 3.6
VDD (Min) (V) 2.6
I2C (Hz) 100K 400K 1M
I2C Addr Configurable
IQ (mA) 5
ISD (μA) 15
Temperature -40℃~85℃
Control Mode /
ADC (bit) 16
Package (mm) FOWLP 4.4X1.7-44B

パッケージ | ピン | サイズ

FOWLP 4.4X1.7-44B

特性

ARM 32-bit STARCU with FPU and DSP,frequency up to 96MHz 128KB Flash, SRAM: 64KB for program and 16KB for data, 8KB ROM Analog: VAVDD = 2.6V to 3.6V, Driver: VVM = 1.8V to 3.6V, I/O: VIOVDD = 1.1V to 3.6V PGA (8-ch), support 4-ch differential signal input or 8-ch single-ended signal input Each PGA offset(8-ch,10bit DAC) independently adjustable PWM driver Sigma-delta ADC(13-ch), configurable 12/14/16bit resolution. DAC(4-ch,8bit), Hall bias current: 0 to 4mA, DAC(4-ch,8bit),TMR bias voltage: 1.2 to 2.5V SPI (2-ch), configurable master / slave / monitor mode, configurable 3/4 wire bus I2C(2-ch), configurable master / slave mode Support I3C slave and UART Support Hardware Cordic and Digital Filter

技術文書

タイプ
タイトル
言語
日付
Product Design Guide AW86102FOR Hardware Design Guide 英文   2024-03-14
Product Design Guide AW86102FOR Hardware Design Guide 中文   2024-03-14
Product Design Guide AW86102 Software Design Guide 英文   2024-03-14
Product Design Guide AW86102 Software Design Guide 中文   2024-03-14
Product Application Note AW86102 Application Note 英文   2024-03-14
Datasheet DS_AW86102_EN_V1.4 英文   2025-12-18
Application plan 【应用方案】一文搞定!压电马达核心技术、驱动流程与国产芯片配套方案详解 中文   2026-06-24

設計と開発

追加の条件や必要なリソースについては、以下のタイトルをクリックして詳細ページをご覧ください。