中文
ホーム
>製品センター
/ 電源管理
/ フラッシュ?赤外線ライトドライバ
/ インダクタレスフラッシュ?赤外線ライトドライバ

AW36529FCR

Inductorless, Four Channel Flash & Indicator 2in1 LED Driver

製品マニュアル :
オンラインプレビュー - AW36529FCR-英語版 - 製品マニュアル

お客様に興味があるかもしれない代替製品

代替製品を比較

AW36429FCR

Inductorless, Four Channel Flash LED Driver

製品詳細情報

Channel
Control Interface I2C
Current (Max) (A) 1.0*2/0.375*2
Torch Current (Max) (A) 0.375
Flash Current Accuracy (%) 10
Flash Timer (Min) (s) 0.04
Flash Timer (Max) (s) 1.6
IO Level (V)
Temperature
Indicator mode YES
Package (mm)
FCQFN 1.6X1.2-10L(0.55)
• Flash and Indicator 2in1 application • Dual Independent 1.0A LED1/LED2 Current Source Flash：3.91mA~1.0A，256 levels 3.91mA/level Torch：1.46mA~375mA，256 levels 1.46mA/level Indicator：0.37mA~375mA，1024 levels 0.37mA/level Flash Timeout：40ms~1.6s，16 levels • Dual Independent 375 mA LED3/LED4 Current Sink Flash：1.46mA~375mA，256 levels 1.46mA/level Torch：1.46mA~375mA，256 levels 1.46mA/level Indicator：0.73mA~375mA，512 levels 0.73mA/level Flash Timeout：40ms~1.6s，16 levels • Optimized Flash LED Current During Low Battery Conditions (IVFM) • Hardware Strobe Enable (STROBE) • 400kHz I2C：AW36529（I2C Address=0x63） • 0.4mm Pitch，FCQFN-10L Package
The AW36529 is a inductorless four channel flash & Indicator 2in1 LED driver that provides a high level of adjustability within a ultra-small solution size. The AW36529 includes two current sources and two current sinks which are controlled independently by I2C-compatible interface. The AW36529 provides IVFM protection mode to prevent system reset or shutdown under low battery condition. The AW36529 is controlled via an I2C-compatible interface. The main features of the AW36529 include: flash / torch / IR / Indicator current, flash timeout duration, IVFM and breath features. The AW36529 also provides hardware flash pin (STROBE) to control flash event. The device operates over a –40°C to +85°C ambient temperature range. The AW36529 is available in small 0.4mm pitch 1.6mm×1.2mm FCQFN-10L package.

技術文書
タイプ
プロジェクトタイトル
言語
日付
产品手册 DS_AW36529_EN_Inductorless Four Channel Flash & Indicator 2in1 LED Driver_V1.2 英文   2019-03-21
产品设计指南 Flash IR LED Driver Hardware Design Guide 中文   2024-03-01

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

硬件开发

评估板

Flash Driver EVB V1.1 — Flash Driver EVB V1.1搭配GUI工具，实现功能演示和性能评估。

Flash Driver EVB V1.1是艾为闪光灯评估板，用以实现闪光灯、手电筒模式演示以及测试。

了解详情
硬件开发

评估板

Flash Driver EVB V1.1 — Flash Driver EVB V1.1搭配GUI工具，实现功能演示和性能评估。

Flash Driver EVB V1.1是艾为闪光灯评估板，用以实现闪光灯、手电筒模式演示以及测试。

了解详情