| Channel |
2 |
| Control Interface |
IIC |
| Current (Max) (A) |
2 |
| Torch Current (Max) (A) |
0.5 |
| Flash Current Accuracy (%) |
7 |
| Flash Timer (Min) (s) |
0.04 |
| Flash Timer (Max) (s) |
1.6 |
| IO Level (V) |
1.2 |
| Temperature |
-40℃~85℃ |
| Indicator mode |
NO |
| Package (mm) |
FCQFN 1.6X1.2-10L |
Dual Independent and Programmable 2A LED Current Source
Flash: 3.91mA~2.0A, 256 levels 7.83mA/level
Torch: 0.98mA~500mA, 256 levels 1.96mA/level
Flash Timeout: 40ms~1.6s, 16 levels
Flash/Torch/IR Mode
Up to 82% Flash Efficiency
Optimized Flash LED Current During Low Battery Conditions (IVFM)
Hardware Flash/Torch Enable (STROBE/TORCH)
Synchronization Input for RF Power Amplifier Pulse Events (TX)
1MHz I2C: AW36525E (I2C Address=0x6B)
0.4mm Pitch, FCQFN 1.6mm×1.2mm×0.55mm -10L Package
Compatible with AW36515, AW36515A, AW36515E
The AW36525E is a dual LED flash driver that provides a high level of adjustability within a small solution size. The AW36525E utilizes a 2MHz or 4MHz fixed-frequency synchronous boost converter to provide power to the dual 2A constant current LED sources. The dual 256 levels current sources provide the flexibility to adjust the current of LED1 and LED2 in Flash/Torch/IR modes. The AW36525E provides IVFM protection to prevent system reset or shutdown under low battery condition.
The AW36525E are controlled via an I2C - compatible interface. The main features of the AW36525E include: flash/torch current, flash timeout duration, IVFM and TX interrupt. The AW36525E also provides hardware flash/torch pin (STROBE/TORCH) to control Flash/Torch events.
The 2MHz or 4MHz switching frequency options, overvoltage protection (OVP), and adjustable current limit allow for the use of tiny, low-profile inductors and 10µF ceramic capacitors. The device operates over a –40°C to +85°C ambient temperature range.
The AW36525E is available in small 0.4mm pitch FCQFN 1.6mm×1.2mm×0.55mm -10L package.
日本語