| Channel |
2 |
| Controlled Slew Rate |
YES |
| Enable Logic |
Active High |
| Output Discharge |
YES |
| Reverse Current Block |
NO |
| TR (μs) |
165 |
| Max Continuous Current (A) |
1.5 |
| Ron (mΩ) |
66 |
| Power Supply (Min) (V) |
1.2 |
| Power Supply (Max) (V) |
5.5 |
| Temperature |
-40℃~85℃ |
| IO Level (V) |
1.8 |
| Package (mm) |
FCDFN 1.6X0.8-8L |
Input voltage range: 1.2V to 5.5V
Integrated dual-channel P-MOSFETs load switch
1.5A maximum continuous switch current each channel
Switch on-resistance(typ.):
Rdson=52mΩ at VIN=5.5V
Rdson=58mΩ at VIN=4.2V
Rdson=66mΩ at VIN=3.3V
Rdson=80mΩ at VIN=2.5V
Rdson=110mΩ at VIN=1.8V
Rdson=222mΩ at VIN=1.2V
Controlled slew rate to limit inrush currents
Internal EN Pull-Down Resistor
Quick output discharge
FCDFN 1.6mm×0.8mm×0.55mm-8L package
The AW35201 is a dual-channel, ultra-low leakage current load switch with output slew rate control. The device contains two P-channel MOSFETs, which can operate over a wide input range of 1.2V to 5.5V and can support a maximum continuous current of 1.5A each channel. Each channel is independently controlled by a low-voltage control signal through EN1/EN2 pin.
The AW35201 features output slew rate control, limiting inrush currents during turn-on to protect downstream devices. The device also offers an integrated 75Ω on-chip resistor for quick output discharge when one switch is turned off.
日本語